Overview
It is a 4.5 in Super-Flex short arm lift kit for the 1984–2001 Jeep Cherokee (XJ). It replaces the stock XJ suspension as a complete system rather than adding to it, and it lifts the vehicle to 4.5 in.
The front control arms are Super-Flex arms that allow caster adjustment. The kit includes front tuned coil springs, rear leaf springs and the other lift components. Shocks are included, and the lift height range is 3 to 4.99 in.
Key features
- Super-Flex short arm front control arms, upper adjustable and lower fixed
- Serviceable Super-Flex spherical ball joints
- New PT-Meg Super-Ride bushings
- Adjustable front track bar
- Front tuned coil springs and rear leaf springs
- Shocks included
Alignment and driveline after lifting
Any short arm lift changes the geometry of the front suspension, which moves the steering and caster settings away from factory values. Caster and toe should be checked after installation, and the adjustable control arms are the means of bringing the front end back into a usable range. Because the rear uses leaf springs, the rear axle may also shift under load, so a quick check of the rear pinion angle is worthwhile.
Raising the body changes the angles at the driveshafts and the transfer case output. Vibration at highway speeds is a common sign that the angles need attention. Confirm that the brake lines and wiring have enough slack after the lift, since the suspension moves more than it did at the factory height.
- Check caster and toe after installation
- Inspect the driveline angles at both ends of the shaft
- Confirm brake line and wiring slack
- Re-torque suspension fasteners after the first drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE6130M |
| Suspension type | Short arm |
| Super-Flex type | Super-Flex short arm |
| Lift height range | 3 to 4.99 in |
| Front springs | Tuned coil |
| Rear lift method | Leaf springs |
| Shocks | Included |
| Axle U-bolts | For Dana 35 |
| Chrysler 8.25 axle | Requires RE1225 |
| Fitment | Direct fit |
Vehicle fitment
This kit fits 1984–2001 Jeep Cherokee (XJ) models. It is made for the XJ only, and other Jeep models and other Cherokee generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
The list covers only the XJ Cherokee. Other Jeep models and other Cherokee generations are not included.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A Chrysler 8.25 axle requires the RE1225 part, which is not included. Because the kit replaces the front suspension and changes ride height, have the alignment checked after installation, and check driveline angles as well.
What’s included
Adjustable upper and fixed lower front control arms, Super-Flex spherical ball joints, an adjustable front track bar, front tuned coil springs, rear leaf springs, New PT-Meg Super-Ride bushings, shocks and U-bolts for a Dana 35 axle. Not included: the RE1225 part needed for a Chrysler 8.25 axle.


