Overview
The Rubicon Express RE7000M is a 4.5 inch Super-Flex short arm lift kit with mono tube shocks, made for the Jeep Wrangler TJ or LJ with factory short arm geometry. It suits owners who want to keep that layout while raising the vehicle.
The kit includes new control arms with Super-Flex spherical ball joints, an adjustable front track bar, replacement 4.5-inch lift springs, extended bump stops, longer front brake lines and Gen II sway bar disconnects. The listed lift height range is 3 to 4.99 inches.
Mono tube shocks are included, so the shock replacement is part of the same kit as the control arms and springs.
Key features
- 4.5 inch Super-Flex short arm lift
- New control arms with Super-Flex spherical ball joints
- Adjustable front track bar
- Replacement 4.5-inch lift springs
- Mono tube shocks included
- Extended bump stops and longer front brake lines
- Gen II sway bar disconnects
Mono tube shocks and damping
Mono tube shocks use a single cylinder with a floating piston, which many owners choose for consistent damping when the vehicle is driven hard. Heat builds up in a shock under repeated bumps, so mounting points and the shock body should be checked for heat-related wear after long off-road days. Matching the shock to the lift and spring rate helps the suspension feel controlled rather than bouncy.
Shock replacement is often done alongside control arm and spring work, since all of these parts affect ride height and wheel control. Check the shock mounts, bump stops and bushings during installation, and re-check bolts after the first few drives. Leaking or worn shocks should be replaced as a pair so both sides of the axle respond the same way.
- Look for oil on the shock body
- Check shock mounts for cracks
- Replace shocks in pairs on each axle
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7000M |
| UPC | 614901452716 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Short arm |
| Kit type | Super-Flex short arm |
| Rear lift method | Coil springs |
| Shocks included | Yes, mono tube |
| Fitment | Direct fit |
Vehicle fitment
It fits 1997–2006 Jeep Wrangler TJ models and 2004–2006 Jeep Wrangler LJ models.
For the JK, JL or Grand Cherokee, confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because the control arms and track bar are replaced, an alignment is needed after the kit is installed. The longer front brake lines are supplied with the kit.
What’s included
The kit includes new control arms with Super-Flex spherical ball joints, an adjustable front track bar, replacement 4.5-inch lift springs, extended bump stops, longer front brake lines, Gen II sway bar disconnects and mono tube shocks.



