Overview
The Rubicon Express JT7140T is a 2.5/3.5 inch Super-Flex suspension lift kit with twin tube shocks for the 2020–2026 Jeep Gladiator JT. It is a direct fit for the Gladiator trims covered by this kit.
The kit is a short arm system, with coil springs at the rear and a lift height range of 0 to 3.5 inches. The specifications list twin tube shocks at the front and the rear, and a 35-inch tire size.
The kit keeps the factory mounting locations while adding new adjustable control arms and serviceable Super-Flex spherical ball joints. Front sway bar disconnects, a forged front adjustable track bar and extended bump stops are included.
Key features
- Twin tube shocks at the front and rear, included
- Adjustable upper and lower control arms at the front and rear
- Serviceable Super-Flex spherical ball joints
- Forged front adjustable track bar and front sway bar disconnects
- Replacement coil springs and extended bump stops
Track bar and steering geometry
A track bar keeps the axle centered under the body as the suspension moves, which matters most when the truck is lifted and steering feels loose. A forged adjustable track bar lets the installer center the axle and set steering geometry, so the wheels track straight. Sway bar disconnects let the axle articulate more freely off road, which can make the ride feel different on pavement.
After installation, check the track bar bushings and ends for play, and recheck the steering centering. Look for uneven tire wear and a pull under braking as signs the geometry needs attention. Replacement coil springs should sit evenly in their seats, and bump stops should be inspected at each service. Re-torque the track bar hardware after the first few trail runs.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJT7140T (JT7140T) |
| Kit type | Super-Flex short arm suspension lift kit |
| Lift height range | 0 to 3.5 inches |
| Tire size | 35 inches |
| Front shocks | Twin tube |
| Rear shocks | Twin tube |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator JT in the 80th Anniversary, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
Wrangler models and Gladiator years outside 2020–2026 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The control arms, track bar and ball joints change the front geometry, so the alignment and the track bar setting should be checked after the install.
What’s included
Twin tube shocks at both ends, the adjustable control arms, Super-Flex spherical ball joints, sway bar disconnects, the forged track bar, replacement coil springs and extended bump stops are included with this kit.


















