Select your vehicle
-13%

Rubicon Express 2.5 Inch Progressive Coil Lift Kit with Twin Tube Shocks – RE7141PT

Rubicon Express

Shop Jeep Wrangler JK Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rubicon Express RE7141PT 2.5 inch progressive coil lift kit with twin tube shocks
  • Made for 2007–2012 Jeep Wrangler JK models
  • Progressive coil springs and twin tube shocks included
  • Front alignment washers, bump stops and extended sway bar end links

Description

Overview

The Rubicon Express RE7141PT is a 2.5-inch progressive coil lift kit with twin tube shocks, made for the 2007–2012 Jeep Wrangler JK. The kit includes the progressive coil springs and twin tube shocks, so the spring and shock replacement come in one package.

Rubicon Express says these systems are easy to install and deliver off-road performance and value without changing driveshafts, exhaust or brake lines. The stated goals are increased ground clearance, extended wheel travel and room for 35 inch tall tires.

Progressive coil springs change their rate as they compress, which gives a softer ride over small bumps and firmer support near full compression. The twin tube shocks are included with the kit.

Key features

  • 2.5 inch lift height with a listed range of 2.5 to 3.5 inches
  • Progressive coil springs for a smoother ride over small bumps
  • Twin tube shocks included
  • Front alignment washers for caster adjustment
  • Bump stops, a rear track bar bracket and extended sway bar end links
  • Built as a complete spring and shock package

Progressive coils on the trail

Progressive springs suit a vehicle that spends time on both pavement and rough ground. Their rate increases as they compress, so the ride stays composed over small bumps, and the suspension firms up on larger hits or when the vehicle carries extra gear. Pairing them with shocks matched to the same ride height helps the vehicle settle evenly after a long day off road, and most owners notice the difference most on washboard gravel.

A coil lift changes caster and driveline angles, so an alignment after installation is part of the job. Check caster after any washer adjustment and recheck the bolts after the first few trail runs. Look for sagging on one side, rubbing tires or a pull to one side, since those point to a setting that needs attention.

  • Plan an alignment soon after installing the springs
  • Inspect bump stops for cracks during routine service
  • Recheck driveline angles after large articulation

Specifications

Brand Rubicon Express
Part number RE7141PT
UPC 700008140261
Lift height range 2.5 to 3.5 inches
Suspension type Progressive coil
Kit type Standard kit
Shocks Twin tube, included
Fitment Direct fit

Vehicle fitment

The kit fits 2007–2012 Jeep Wrangler JK models.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Caster is adjusted with the front alignment washers, so plan an alignment after the new springs and shocks are installed. Any lift changes driveline angles, so check them during installation.

What’s included

The kit includes progressive coil springs, twin tube shocks, front alignment washers, bump stops, a rear track bar bracket and extended sway bar end links.

SKU: R/ERE7141PT Category:

Specification

Shipping weight 86.70 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2012All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RE7141PT include shocks?

Yes. Twin tube shocks are included with the progressive coil springs, so the spring and shock replacement come in one kit.

Will the RE7141PT fit a 2013 Wrangler JK?

The kit is made for 2007 to 2012 Jeep Wrangler JK models. Confirm your vehicle's model year and trim before ordering, since 2013 models fall outside that range.

What lift height is this kit?

It is a 2.5 inch lift kit, with a listed lift height range of 2.5 to 3.5 inches. The progressive springs provide a softer ride over small bumps than linear springs.

Should progressive coil springs be replaced in pairs?

Yes, replacing the springs as a matched pair keeps the ride height and spring rate even from side to side. Check that both sides sit at the same height after installation and again after the first few drives.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Lift Kits on Amazon