Overview
It is a nitrogen-charged monotube front shock for 2011–2026 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD trucks with a 3.5 to 4.5 inch lift. The body is T6061 brushed aluminum with black anodized accents, and it is a direct-fit part.
A floating piston separates the shock oil from the high-pressure nitrogen, which helps avoid cavitation and gives a quick reaction. The high-flow piston is 46mm across, and the shock is designed to be mounted body-up.
Key features
- Monotube body with nitrogen charge
- Floating piston that separates oil and nitrogen
- T6061 brushed aluminum body with black anodized accents
- 46mm high-flow internal piston
- Body said to dissipate heat faster than other materials
- Designed for body-up mounting
Choosing a lift height
Lift height decides how far a front shock must extend and compress, so matching the shock to the suspension setup matters. A 3.5 to 4.5 inch lift on a heavy-duty Silverado or Sierra changes the front angles and the loads on the shock, so confirm the lift falls in that range before ordering.
Monotube shocks with a floating piston are often chosen for steady damping under load, since the separated gas helps control foaming. Pair the new shock with fresh bushings and check the front bump stops, which wear at a similar pace. Tire size and wheel weight also affect how the front reacts over bumps.
- Measure front ride height before ordering
- Replace worn bushings at the same time
- Recheck alignment after the lift is in place
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C760780_A |
| Product line | V2 Series |
| Shock type | Monotube |
| Position | Front |
| Lift height | 3.5-4.5 in. |
| Body material | T6061 brushed aluminum with black anodized accents |
| Piston | 46mm high-flow, internal floating design |
| Charge | Nitrogen |
| Mounting | Body-up |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2011–2026 Chevrolet Silverado 2500 HD in Custom, High Country, LT, LTZ and WT models, the 2011–2026 Silverado 3500 HD in High Country, LT, LTZ and WT models, and the 2011–2026 GMC Sierra 2500 HD and 3500 HD. It is sized for a 3.5 to 4.5 inch lift.
The list covers the HD Silverado and Sierra from 2011 to 2026 only. Light-duty pickups and 2010 and older trucks are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shock is designed for body-up mounting, confirm its orientation before installing it. Check the front alignment once the lift is in place.
What’s included
One front V2 monotube shock, part number R/C760780_A.









