Overview
The Rough Country 23148_B is a front N3 monotube shock sold as a pair for models with 3 to 4.5 inches of lift. It has a stud top mount, an eye bottom mount, gas charged construction and a direct fit for the front position. The extended length is 26.58 inches and the collapsed length is 15.72 inches.
The shock also fits the 2018 Jeep Wrangler JL Unlimited Moab four-door, alongside the 2007 to 2018 JK models in the trims named in the vehicle fitment section.
The shock uses 10-stage variable valving and high pressure nitrogen charge. It has a 35mm piston and an 18mm chromed hardened, spring loaded piston rod. The 54mm body dissipates heat faster, and the shock is rated to 36kN tensile strength with military spec fluid rated to 40 degrees C.
Rubber bushings absorb vibration, and the shock has a metallic silver paint finish. It carries a 3-year warranty.
Key features
- 10-stage variable valving
- High pressure nitrogen charge
- 35mm piston and 18mm chromed hardened rod
- 54mm shock body
- Spring loaded piston rod seal
- Rubber bushings and metallic silver paint
Matching shocks to lift height
Shock length and travel depend on the lift, so the lift range is the first thing to check. A shock that is too short can limit travel and bottom out, while one that is too long can bind at the mounts. Measure the lift on the truck before ordering, and compare the measurement against the stated range.
The eye mount on the bottom end needs a matching bracket or bushing. Check the eye and the stud top mount against the existing hardware, and replace worn bushings before installing new shocks. On rough trails, a correctly sized shock also reduces wear on the mounts and the body.
Changing the rear shocks at the same time can help the truck handle evenly, especially after a lift. Keep the front pair matched to each other and recheck the setup after the first drives.
- Measure lift before ordering
- Check eye bushing condition
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 23148_B |
| Shock series | N3 Performance |
| Shock type | Monotube |
| Lift range | 3 to 4.5 inches |
| Extended length | 26.58 inches |
| Collapsed length | 15.72 inches |
| Top mount | Stud |
| Bottom mount | Eye |
| Body | 54mm |
| Piston | 35mm |
| Rod | 18mm chromed hardened |
| Tensile strength | 36kN |
| Warranty | 3-year warranty |
| Sold | As a pair |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of those trims.
The list also covers the 2018 Jeep Wrangler JL Unlimited Moab four-door.
Other JL trims and earlier Wrangler generations are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The shocks are sold as a pair. Check the bushings and hardware against your installation before starting.









