Overview
The Rough Country N3 front shock R/C23269_L is a nitrogen-charged twin-tube shock for 1977–1979 Ford F-150 pickups with a 3.5 to 6.5 inch lift. It uses a stud at the top and an eyelet at the bottom, and it is sold as a pair.
It is one of the longer-stroke front shocks in the N3 line, with an extended length of 22.9 in and a compressed length of 13.97 in. The 35mm piston and 18mm chrome-hardened piston rod set the strength of the unit, and the 54mm body is designed to shed heat faster during long descents and repeated articulation on rough trails.
Key features
- Nitrogen charged shock body
- 10-stage variable valving
- 35mm piston with an 18mm chrome-hardened piston rod
- 54mm shock body for heat dissipation
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal
- Rubber bushings and military spec damper fluid
Care for older Ford mounts
Older F-150 front ends carry decades of road grime, and the shock mounts show it. Corrosion around the eyelets and upper studs can lock the shock in place or let it knock as the wheels move. Clean the mounting faces, wire-brush any rust, and replace bushings that have hardened or split before the new shocks go in.
The stroke on a longer-travel front shock is useful on a lifted truck, but it also means the rod and seal move through a wider range. Keep the shock body free of dirt, and wipe the rod after dusty runs so grit does not wear the seal. Re-check the fasteners after the first few trips and look for fresh leaks at the rod seal.
- Wire-brush rust from eyelet faces
- Replace split or hardened bushings
- Wipe the piston rod after dusty trips
- Check fasteners after the first few drives
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23269_L |
| Product line | N3 Performance |
| Shock type | Twin-tube shock kit |
| Position | Front |
| Lift height | 3.5-6.5 in. |
| Top mount | Stud |
| Bottom mount | Eyelet |
| Extended length | 22.9 in |
| Compressed length | 13.97 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Finish | Metallic silver paint |
| Warranty | 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It fits 1977–1979 Ford F-150 pickups across its base, custom, Northland, Ranger and XLT models. It is sized for a lift of 3.5 to 6.5 inches.
The list covers 1977–1979 F-150 pickups only, so 1980 and newer F-150s and other Ford trucks are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the condition of the upper and lower mounts on these older trucks before fitting new shocks. Have the front alignment checked after the lift is installed.
What’s included
Sold as a pair: two N3 front shocks, one for each side. Fit both shocks together so the damping matches on each side, and check the eyelet mounts against the existing brackets first.









