Select your vehicle

Rough Country N3 Rear Shocks – 23299_A

Rough Country

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2011–2017 and 2018–2021 Jeep Grand Cherokee
  • Rear shock for a 0 to 2.5 inch lift
  • Stud top mount and clevis bottom mount
  • Extended length 22.46 in, compressed length 17.4 in
  • 35mm body, 18mm chrome-hardened piston rod
  • Twin-tube design; sold as a pair

Description

Overview

The Rough Country N3 rear shock R/C23299_A is a twin-tube rear shock for 2011–2017 and 2018–2021 Jeep Grand Cherokee models with a lift of 0 to 2.5 inches. It uses a stud at the top and a clevis at the bottom, and it is sold as a pair.

The extended length is 22.46 in and the compressed length is 17.4 in. The shock uses an 18mm chrome-hardened piston rod, and the specifications list a 35mm body diameter. Ten-stage variable valving and a nitrogen charge handle the damping.

Key features

  • Twin-tube design with nitrogen charge
  • 10-stage variable valving
  • 18mm chrome-hardened piston rod
  • Stud top mount and clevis bottom mount
  • Rated to 36kN tensile strength
  • Spring-loaded piston rod seal and rubber bushings
  • Military spec damper fluid rated to -40 C

Clevis versus eyelet mounts

The bottom mount decides which bracket the shock can connect to, so it is the first thing to check when comparing rear shocks for a Grand Cherokee. A clevis uses a pin through a fork, while an eyelet uses a bolt through a round hole. The two are not interchangeable without changing the bracket, so the lower mount on the truck should be inspected before the shock is ordered.

Twin-tube shocks are common on the Grand Cherokee and handle daily road use well. Once a lift is added, the geometry changes and the shock may need to work through a longer stroke, so the rear alignment and ride height are worth checking after installation. Watch for uneven tire wear, a rear end that sways, or fluid on the shock body as signs that the old shock has lost its damping.

  • Measure the lower bracket before buying
  • Look for bent or cracked brackets during installation
  • Recheck rear alignment after the first drive

Specifications

Brand Rough Country
Part number R/C23299_A
Product line N3 Performance
Shock type Twin-tube
Position Rear
Lift height 0-2.5 in.
Top mount Stud
Bottom mount Clevis
Extended length 22.46 in
Compressed length 17.4 in
Body diameter 35mm
Piston rod 18mm chrome-hardened
Charge Gas charged, nitrogen
Valving 10-stage variable
Tensile strength 36kN
Fluid Military spec, rated to -40 C
Finish Metallic silver paint
Warranty Covered by a 3-year warranty.
Sold as Pair

Vehicle fitment

Fits the 2011–2017 Jeep Grand Cherokee (WK), including the 75th Anniversary, Laredo, Limited, Overland, SRT and Trailhawk models, and the 2018–2021 Grand Cherokee in its Altitude, High Altitude, Laredo, Limited, Overland, Summit and Trailhawk trims. It is sized for a 0 to 2.5 inch lift.

The list covers the Grand Cherokee from 2011 to 2021 only, so the earlier ZJ and WJ Grand Cherokee models and the 2022 and newer trucks are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The clevis bottom mount is not the same as an eyelet, so check the lower bracket on your truck before ordering. Confirm the rear alignment once the shocks are installed.

What’s included

Sold as a pair, with one rear shock for each side.

Fitment

VehicleYearsTrims
Jeep Grand Cherokee2018–202180th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, SRT, Summit, Trackhawk, Trailhawk, Upland
Jeep Grand Cherokee (WK)2011–201775th Anniversary, Laredo, Limited, Overland, Overland Summit, SRT, SRT8, Summit, Trailhawk

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Rough Country R/C23299_A fit a 2022 Jeep Grand Cherokee?

No. The fitment for this rear shock covers 2011 to 2021 Jeep Grand Cherokee models only, so 2022 and newer trucks are not included. Confirm your vehicle's year, model and trim before ordering.

What bottom mount does this shock use?

It uses a clevis at the bottom and a stud at the top. Check that your lower rear bracket accepts a clevis before ordering, since the mount type decides which bracket works.

What lift height is it designed for?

It is designed for a 0 to 2.5 inch lift. The shock is sold as a pair and uses an 18mm chrome-hardened piston rod inside a 35mm body.

What are the extended and compressed lengths?

The shock measures 22.46 in extended and 17.4 in compressed. It is nitrogen charged and rated to 36kN tensile strength.

How can I tell if the rear shocks need replacing?

Worn rear shocks often cause bounce after bumps, nose-dive under braking, or uneven tire wear. Oil on the shock body or a clunking sound over small bumps also suggests the shock has lost damping and should be inspected.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon