Overview
The Rough Country N3 front shock R/C23227_A is a nitrogen-charged twin-tube shock for 2009–2024 Ram 1500 trucks, including the 2019–2024 Ram 1500 Classic. It uses a stud at the top and a bar pin at the bottom, and it is sold as a pair.
Rough Country gives the lift range two ways: 0 to 2 inches in one place and 2 to 5 inches in another. Confirm your lift height before ordering. The extended length is 15.16 in and the compressed length is 10.26 in, which suits the smaller end of the lift range.
Key features
- Nitrogen charged shock body
- 10-stage variable valving
- 35mm piston and 18mm chrome-hardened piston rod
- 54mm shock body designed to shed heat faster
- Rated to 36kN tensile strength
- Spring-loaded piston rod seal and rubber bushings
- Military spec damper fluid
Bar pin mounts and alignment
The bottom mount decides how a front shock connects to the axle bracket, and a bar pin mount is a different connection from the eyelet design used on larger N3 front units. Before fitting, confirm the bracket on your truck matches the bar pin and that the pin sits square without forcing the shock into place, since a bent or misaligned mount can bind the rod and wear the bushing early.
A lift raises the front end and changes the angle the shock travels through, which affects caster, camber and toe. Plan an alignment once the shocks are in, and expect the steering to feel slightly different until the suspension settles. Replace both sides together so the damping stays matched, and inspect the bar pin bushing at every oil change.
- Check the bottom bracket before ordering
- Look for bent or worn pins
- Confirm stud top mount clearance at full compression
- Retighten the top stud after the first few drives
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C23227_A |
| Product line | N3 Performance |
| Shock type | Twin-tube shock kit |
| Position | Front |
| Lift height | 0-2 in. and 2-5 in. (see note) |
| Top mount | Stud |
| Bottom mount | Bar pin |
| Extended length | 15.16 in |
| Compressed length | 10.26 in |
| Body diameter | 54mm |
| Piston | 35mm |
| Piston rod | 18mm chrome-hardened |
| Charge | Gas charged, nitrogen |
| Valving | 10-stage variable |
| Tensile strength | 36kN |
| Finish | Metallic silver paint |
| Warranty | 3-year warranty. |
| Sold as | Pair |
Vehicle fitment
It fits 2009–2010 Dodge Ram 1500, 2011–2018 Ram 1500 and 2019–2024 Ram 1500 Classic trucks across their cab and trim packages.
The list does not include Ram 2500 or Ram 3500 trucks, or 2002–2008 Ram 1500 models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bar pin bottom mount differs from the eyelet mount on the larger N3 front shocks, so check which bottom bracket your truck uses. Have the alignment checked after installation, particularly if the lift height is at the upper end of the range, since that raises the front suspension further.
What’s included
Sold as a pair: two N3 front shocks, one for each side. Fit both shocks together so the damping matches on each side.










