Overview
The Rock Krawler RK05611 is a front stackable bump stop kit for the Jeep Wrangler. It adds 1 to 3 inch of front up-travel control, which Rock Krawler says limits up travel for improved suspension performance and lets the owner dial in the travel. The stops are urethane.
The kit is intended for the 1997–2006 Jeep Wrangler TJ and the 2004–2006 Jeep Wrangler LJ. Check fit against your vehicle’s year, model and trim, including 2007–2018 Wrangler JK models.
Key features
- Front adjustable bump stop
- Adds 1 to 3 inch of up travel control
- Urethane construction
- Limits up travel
- Limited lifetime warranty
Setting the stop height
An adjustable bump stop limits up travel, so the point where the suspension meets the stop changes with how the kit is set. Set it with the vehicle at ride height and a clear reference, then drive a short distance and recheck. Small changes at the front can affect steering geometry and the clearance of the brake hoses.
Urethane stops are durable, but they still wear with heat, sunlight and repeated compression. Check them for splitting or permanent set at each service. If the stop height has been raised, inspect the front driveshaft angle and shock mounting for strain, since those parts see more load when travel is limited.
- Set height with the vehicle at ride height
- Recheck the setting after the first few drives
- Inspect urethane for splits or permanent set
- Look for rub on brake hoses and steering parts
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSRK05611 |
| Adjustment range | 1 to 3 inch added |
| Type | Urethane bump |
| Position | Front |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler LJ in its Unlimited and Unlimited Rubicon trims, and the 1997–2006 Jeep Wrangler TJ in its 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Check fit against your vehicle’s year, model and trim, including 2007–2018 Wrangler JK models, before buying.
Installation notes
The kit lets you set the up travel at the front, which limits suspension travel at the top of its range. Check the setting after installation to confirm the intended engagement point.









