Overview
The Rock Hard 4×4 Parts RH-9001 is a steering stabilizer and tie rod clamp that mounts on the tie rod of 2007–2016 Jeep Wrangler JK models, for 2-door and 4-door applications. It is sized for a 1-5/8 inch OD tie rod.
The locking collar and clamp design is similar to the Sports Cage systems from Rock Hard 4×4 Parts. The clamp has a rounded skid surface and a black powder coat finish. A lifetime warranty applies to the clamp.
Key features
- Fits a 1-5/8 inch OD tie rod
- Locking collar design
- Black powder coat finish
- Rounded skid surface
- 100% bolt-on installation
- All mounting hardware included
- 100% made in U.S.A.
Before you install
A steering stabilizer and tie rod clamp works on the steering linkage, where it helps limit the side-to-side movement that a worn tie rod can develop. Off road, rough ground and larger tires put extra load on the linkage, so a clamp that grips the tie rod firmly helps the steering respond predictably. On the road, the steering should feel steady and free of play when the wheel is turned.
Before fitting, look over the tie rod for bends, cracks and wear at its ends. A clamp can only support a sound rod, so a damaged tie rod should be replaced rather than clamped. After the first few drives, check the locking collar, skid surface and hardware for movement, and re-check the tie rod ends for play.
- Inspect the tie rod for bends and cracks first
- Keep the rounded skid surface clear of debris
- Re-check mounting hardware after the first trail runs
- Have toe and alignment checked after steering work
Specifications
| Brand | Rock Hard 4×4 Parts |
|---|---|
| Part number | RH-9001 |
| Brand part code | RFPRH-9001 |
| UPC | 70000774105 |
| Tie rod size | 1-5/8 inch OD |
| Finish | Black powder coat |
| Surface | Rounded skid surface |
| Installation | 100% bolt-on, all mounting hardware included |
| Warranty | Lifetime, per the brand |
| Fitment type | Direct fit |
Vehicle fitment
Based on the Rock Hard 4×4 Parts fitment list, the RH-9001 covers the 2007–2016 Jeep Wrangler (JK) with these trims: 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, X, and the Unlimited versions of those trims.
It is designed for 2007–2016 Jeep Wrangler JK models. Confirm fit for your vehicle’s year, model and trim before ordering, especially for a newer Wrangler or a Gladiator.
Installation notes
The clamp installs with all mounting hardware included. Tighten it fully onto the tie rod before driving.
What’s included
All mounting hardware is included.











