Overview
The ARB FK50 is a steering stabilizer bracket from ARB 4×4 Accessories, part number FK50. It is required for left hand drive JK Wranglers that use the ARB OMESD48 steering stabilizer, because it mounts the stabilizer above the tie rod. The bracket is written for 2- and 4-door models, and all hardware is included.
The bracket is for left hand drive JK Wranglers. Left hand drive means the driver sits on the left side of the cab.
Key features
- Steering stabilizer bracket for the OMESD48.
- Mounts the stabilizer above the tie rod on left hand drive JKs.
- All hardware included.
- Mount-only type, with no shock boot.
Left hand drive JK installation checks
Left hand drive JK installs are mostly about getting the stabilizer and its bracket positioned clear of the steering linkage. Confirm the bracket sits above the tie rod with room to move through full steering travel, and that no wiring, hoses or exhaust parts are pinched. A bracket that is slightly off can load the stabilizer unevenly and wear its ends faster.
Because the bracket carries the stabilizer’s load, inspect it together with the tie rod ends and the stabilizer’s mounting hardware. Look for cracks around welds, loose bolts and rubbing marks on the axle or track bar. Tighten fasteners to the torque for your vehicle from a service manual rather than estimating by feel.
- Check clearance through full steering travel
- Inspect bracket welds for cracks
- Look for rubbing on the track bar or axle
- Confirm steering wheel position before ordering
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | FK50 |
| UPC | 9332018009647 |
| Type | Mount only |
| Body style | 2- and 4-door models |
| Hardware | All included |
| Shock boot | Not included |
| Used with | ARB OMESD48 steering stabilizer |
Vehicle fitment
It is for left hand drive 2007–2018 Jeep Wrangler JK models. The JL and TJ Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
The JL and TJ Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Left hand drive JK Wranglers need this bracket to mount the OMESD48 stabilizer above the tie rod. Confirm the steering wheel position on your vehicle before ordering.
What’s included
One steering stabilizer bracket with all hardware.









