Overview
The ReadyLift 44-3072 is a 7-to-8-inch adjustable front and 5.0-inch rear lift kit for 2011 to 2019 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks in 2WD and 4WD form. The kit includes four Bilstein 5100 Series performance shocks and tubular upper control arms. The kit covers the High Country, LT, LTZ and WT Silverado versions and the Base, Denali, SLE, SLT and WT Sierra versions.
The sub frame assemblies are laser cut and CNC formed so they bolt in directly. Custom formed nodular iron knuckles are included, and an integrated differential drop bracket system is meant to keep the CV axle angles correct on 4WD trucks. The front lift comes from ReadyLift forged torsion keys, adjustable from 7 to 8 inches. A cast iron 5.0-inch rear block lifts the back, and steel bump stop extensions, a skid plate and sway bar end links complete the package. The sub frame and other parts are powder coated with a Plascoat finish that ReadyLift describes as a performance polymer alloy coating.
Key features
- 7 to 8 inches of adjustable front lift
- 5.0-inch cast iron rear block
- Four Bilstein 5100 Series performance shocks
- Tubular upper control arms
- Laser cut and CNC formed sub frame assemblies
- Custom formed nodular iron knuckles
- Integrated differential drop bracket for 4WD CV angles
- Steel bump stop extensions, skid plate and sway bar end links
- Plascoat powder coated finish
Things to check
Forged torsion keys and sub frame drops change how the front suspension sits, so the final result depends on setting the keys evenly and then aligning the truck. Adjusting the keys within the 7-to-8-inch range lets you tune front height to match the rear, which helps keep the truck level under load. Once the keys are set, record the position so future adjustments return to a known starting point.
Bigger lifts change brake hose length, steering shaft angles and CV or driveline angles, so inspect them after installation. Tire and wheel fit also matter, since the wheel limits for this kit mean the wrong wheel can rub on the sub frame or the knuckle. Check bump stop extensions and sway bar end links for wear, because they engage more often on a raised truck.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY44-3072 |
| Front lift | 7 to 8 inches, adjustable with forged torsion keys |
| Rear lift | 5.0 inches, cast iron block |
| Shocks | Four Bilstein 5100 Series |
| Wheel fit | Stock 20-inch wheels, or 9-inch wheels with 4.75 to 5.5 inches of backspacing |
| Wheel limit | Stock 17-inch and 18-inch wheels cannot be used |
| Finish | Plascoat powder coat |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2011 to 2019 Chevrolet Silverado 2500 HD and 3500 HD models in the High Country, LT, LTZ and WT versions, and GMC Sierra 2500 HD and 3500 HD models in the Base, Denali, SLE, SLT and WT versions.
The kit covers both 2WD and 4WD trucks. Models from 2010 and earlier and from 2020 and later are not covered. Match your truck’s year, model and trim to this fitment before ordering.
Installation notes
The forged torsion keys set the front height, so final front height depends on how the keys are adjusted. The sub frame assemblies and differential drop bracket change front geometry, so a wheel alignment belongs after installation. The front lift adjusts within the 7-to-8-inch range.
What’s included
The kit includes the tubular upper control arms, the laser cut sub frame assemblies, the custom formed knuckles, the differential drop bracket system, the forged torsion keys, the 5.0-inch cast iron rear block, the steel bump stop extensions, the skid plate, the sway bar end links and four Bilstein 5100 Series shocks.









