Overview
The ReadyLift 69-1935 is a 3.5-inch front and 2-inch rear SST lift kit for the 2019 Ram 1500 in 2WD and 4WD form. The 2019 Ram uses a different suspension design from the previous generation, so this kit was developed for the new truck. It fits Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel and Tradesman versions of the 2019 model.
The 2019 Ram comes with a composite upper control arm and a sheet metal cover. ReadyLift’s engineers decided to include its DOM tube steel upper control arms with corrected ball joint angles. The front lift is delivered by CNC-machined billet aluminum top mount strut extensions and spring pre-load spacers, which ReadyLift says combine to give a true 3.5 inches of front lift. The kit is said to fit a 35-inch tall tire on a 20×9 wheel with 0 offset.
Key features
- 3.5 inches of front lift and 2 inches of rear lift
- DOM tube steel upper control arms with corrected ball joint angles
- CNC-machined billet aluminum top mount strut extensions
- Spring pre-load spacers at the front
- Rear spacer lift on the 2019 Ram rear setup
- Clearance for up to 35-inch tall tires on 20×9 wheels with 0 offset
Rear setup and driveline checks
A two-inch rear lift changes the angle of the driveshaft and the rear axle pinion, which is why driveline angles are worth measuring after the work is done. Vibration at highway speed is the usual sign that the angles have moved too far. Rear spacer or block lifts also change how the springs seat, so the rear should be rechecked once the truck has settled.
Front lifts often bring larger tires and heavier loads into play. Brake hoses, sway bar links and wiring that were sized for the factory height should be checked for stretch and rubbing at full steering lock. Replacing worn upper ball joints or control arm bushings at the same time keeps the new geometry from wearing unevenly.
- Measure driveline angles after the rear setup is installed
- Check brake hose length at full steering lock
- Inspect the upper control arm bushings at each service interval
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-1935 |
| Front lift | 3.5 inches |
| Rear lift | 2 inches |
| Upper control arms | DOM tube steel, corrected ball joint angles |
| Front lift components | Billet aluminum top mount strut extensions and spring pre-load spacers |
| Rear lift component | Spacer |
| Lift height range | 0 to 3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for 2019 Ram 1500 models in the Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel and Tradesman versions.
The 2018 and 2020 Ram 1500 are not covered, and the 2019 rear setup is specific to this model year. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The control arm replacement and top mount strut extensions change front geometry, so the wheel alignment should be checked after installation. The 2019 rear setup uses its own fabricated part, so confirm the rear components are in the box before fitting.
What’s included
The kit includes the DOM tube steel upper control arms, the billet aluminum top mount strut extensions, the spring pre-load spacers and the rear spacer components.









