Overview
The ReadyLift 69-2930 is a 3.0-inch front and 1-inch rear lift kit for the 2019 to 2021 Ford Ranger in the Lariat, XL and XLT versions. ReadyLift combines its 3.0-inch front leveling kit with a 1-inch rear block to lift the front and rear, leaving a small amount of rake for towing or hauling. The front is a CNC-machined billet aluminum kit, and the rear uses a heavy-duty block with centering pins and longer U-bolts.
The front uses a Top Hat Replacement design that combines a top mount leveling kit and a spring preload spacer in one component. The kit allows a mild increase in tire size and requires no cutting or modifications. A spring compressor is needed for installation, and the work can be finished in a few hours.
Key features
- 3.0 inches of front lift from billet aluminum
- Top Hat Replacement design combining a top mount and spring preload spacer
- 1-inch tall rear block with centering pins
- Longer U-bolts for the rear block
- Keeps the factory ride and handling.
- Front crash bars can be adjusted forward to add clearance
Tire size and clearance
Tire size is one of the main limits on any leveling or lift kit. A larger tire adds rolling diameter, which changes speedometer reading, gearing feel and how the tire sits in the fender. Check the sidewall and load rating of any tire you plan to run, and make sure the wheel offset keeps the tire clear of the body at full steering lock.
A billet top hat front and a heavy-duty rear block both change how the suspension is loaded. Hardware should be checked after the first few drives, because settling can loosen the U-bolts. Rear blocks also depend on the centering pins sitting square, so look for shifting or wear at each service.
- Check tire sidewall and load rating before buying
- Measure clearance at full lock and at full suspension travel
- Confirm the spring compressor is in hand before starting
- Retorque U-bolt nuts after the first few drives
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-2930 |
| Front lift | 3.0 inches |
| Rear lift | 1 inch, block and U-bolt |
| Front components | CNC-machined billet aluminum top hat kit |
| Lift height range | The front lift range runs from 0 to 3.5 inches. |
| Tire options | 285/60R18 and 275/65R18 on 18×9 wheels; 275/55R20 and 285/55R20 on 20×9 wheels |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2019 to 2021 Ford Ranger models in the Lariat, XL and XLT versions.
The kit is not for Ranger Ford Performance Level 1, 2 or 3 packages, and it is not for the Tremor edition. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation needs a spring compressor. Loosen and move the front crash bars forward to add clearance. Check the alignment after installation and check the rear block for driveline angles.
What’s included
The kit includes the billet aluminum top hat front components, the 1-inch rear block with centering pins and the longer U-bolts.











