Overview
The ReadyLift 44-34900 is a 9-inch lift kit with Falcon 1.1 monotube shocks for 2014 to 2018 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. It works on trucks with or without front MagneRide and fits trucks with factory aluminum or stamped steel front suspension. It fits Silverado 1500 Custom, High Country, LS, LT, LTZ, SSV and WT versions, and Sierra 1500 Base, Denali, SLE and SLT versions. Tires up to 37 inches can be used.
The kit includes new tubular upper control arms with TCT pivot bushings, which are stronger than the factory stamped steel arms. The kit keeps the factory turning radius and limits the track width increase to less than 0.5 inch per side. A clam-shell lower strut extension keeps the factory struts, both standard and front-only MagneRide, without strut rotation. Boxed steel front and rear cross members and a full width 3/16-inch front skid plate are included.
Key features
- 9-inch lift for 2014 to 2018 1500 trucks
- Falcon 1.1 monotube shocks
- New tubular upper control arms
- TCT pivot bushings
- Clam-shell lower strut extensions
- Boxed steel front and rear cross members
- Full width front skid plate of 3/16-inch steel
- Boxed 1/4-inch differential drop brackets
- Rear add-a-leaf spring with fabricated steel blocks
Choosing the right setup
A 9-inch lift on this platform combines a new upper control arm set, clam-shell strut extensions and a rear add-a-leaf spring. The leaf adds rate at the rear, so the rear ride will feel different from stock, especially unloaded. Monotube shocks are designed to control damping consistently, which suits a lifted truck that sees varied road and trail surfaces.
Choosing a tire size comes next. The kit supports tires up to 37 inches on a 9-inch wide wheel with -12 offset, so match the wheel offset to the tire to avoid rubbing on the frame or inner fender. Check the boxed cross members and skid plate after rough use, and recheck the differential drop bracket bolts after the first few trips because the driveline angles change with the lift.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY44-34900 |
| Lift kit size | 9 inches |
| Shocks | Falcon 1.1 monotube |
| Upper control arms | New tubular, with TCT pivot bushings |
| Rear lift components | Add-a-leaf spring and fabricated 3/16-inch steel blocks |
| Tire size | Up to 37 inches on a 9-inch wide wheel with -12 offset |
| Drive type | 2WD or 4WD, not AWD |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2014 to 2018 Chevrolet Silverado 1500 models in the Custom, High Country, LS, LT, LTZ, SSV and WT versions, and GMC Sierra 1500 models in the Base, Denali, SLE and SLT versions.
The kit is for 2WD or 4WD trucks, not AWD. It works with aluminum or stamped steel front suspensions and with front-only MagneRide. Confirm the front suspension type and your year, model and trim before ordering.
Installation notes
The new upper control arms and clam-shell extensions change the front geometry, so a wheel alignment is needed after installation. The differential drop brackets change the driveline angles, so those should be checked as well. The rear add-a-leaf spring changes the rear spring rate, so the rear ride will differ from stock.
What’s included
The kit includes the new tubular upper control arms with TCT pivot bushings, the clam-shell lower strut extensions, the boxed steel cross members, the full width skid plate, the differential drop brackets, the rear add-a-leaf spring and fabricated blocks, and the Falcon 1.1 monotube shocks.









