Overview
The ReadyLift 49-2768 is a 6.5-inch front lift kit with SST3000 shocks for 2017 to 2019 Ford F-250 Super Duty 4WD trucks that have a two-piece driveshaft. The kit raises the front a total of 6.5 inches and accommodates tires up to 38 inches tall. It fits F-250 Super Duty models in the King Ranch, Lariat, Limited, Platinum, XL and XLT versions.
The kit uses custom wound coil springs. Radius arm drop brackets let the owner keep the factory radius arms, and ReadyLift says they also correct caster. The rear is lifted with OEM style cast iron rear lift blocks that bring the rear level with the front. The kit also includes a drop pitman arm, a track bar bracket, sway bar end links and a drive shaft spacer, and ReadyLift says all hardware is supplied.
Key features
- 6.5 inches of front lift
- Custom wound front coil springs
- Radius arm drop brackets that keep the factory radius arms and correct caster
- OEM style cast iron rear lift blocks
- SST3000 shocks
- Drop pitman arm and track bar bracket
- Sway bar end links and drive shaft spacer
Things to check
A front lift built from custom coil springs, radius arm drop brackets and a drop pitman arm changes caster, camber and steering geometry at once. Because the factory radius arms stay in use, the drop brackets set the new position of the front axle, and that position must be measured after installation. Alignment is the step that brings the front back into specification for tire wear and steering feel.
Larger tires add rotating weight and change gearing, which can make the truck feel slower and put more load on the driveline. Rear lift blocks and a drive shaft spacer also change driveline angles, so inspect U-joints and the carrier bearing after the first trips. Plan to check ball joints, brake hoses and bump stops at the same time, since these parts see more movement once the truck sits higher.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY49-2768 |
| Lift kit size | 6.5 inches |
| Front spring | Custom wound coil springs |
| Rear lift method | Block and spacer, OEM style cast iron |
| Shocks | SST3000 |
| Tire size | Up to 38 inches tall |
| Driveshaft | Two-piece driveshaft |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2017 to 2019 Ford F-250 Super Duty models in the King Ranch, Lariat, Limited, Platinum, XL and XLT versions.
The fitment covers 2017 to 2019 F-250 models only, so confirm your vehicle’s year, model, driveshaft type and trim before ordering.
Installation notes
The radius arm drop brackets keep the factory radius arms in use and correct caster, which ReadyLift says is part of the design. The custom coil springs and the rear blocks change ride height at both ends, so an alignment and a driveline angle check belong after installation.
What’s included
The kit includes the custom wound coil springs, the radius arm drop brackets, the OEM style cast iron rear lift blocks, the SST3000 shocks, the drop pitman arm, the track bar bracket, the sway bar end links and the drive shaft spacer. ReadyLift says all hardware is included.










