Overview
The ReadyLift 69-6836 is a 3.5-inch Terrain Flex two-arm coil spring lift kit with Falcon 2.1 monotube shocks for the Jeep Wrangler JL. It suits JL owners who want a good on-road ride along with better off-road and rock-crawling performance. It fits 2018 to 2026 Wrangler JL two-door and four-door models in many versions, including 80th Anniversary, Freedom, Islander, Rubicon, Sport and Sport S two-door models, and the Unlimited versions of the same trims, including Unlimited Rubicon 392 and 4xe variants.
The kit uses two heavy-duty front DOM tube steel control arms. Each arm carries ReadyLift’s proprietary Terrain Control Technology bushings in forged housings. ReadyLift says these TCT bushings give more articulation and range of motion than factory bonded bushings. The arms are said to increase ground clearance and improve caster geometry for on-road handling.
Key features
- 3.5 inches of lift from four linear rate coil springs
- Two heavy-duty DOM tube steel front control arms
- TCT bushings in forged housings at each arm
- Falcon 2.1 monotube shocks
- Bump stop extensions to control compression and tire contact
- New rear track bar relocation bracket
- JL-specific heavy-duty adjustable front track bar
- Tires up to 37 inches.
Articulation and bump stop checks
Articulation is how far a tire can rise and fall while the vehicle stays on the trail. Longer travel from a lift can improve it, but bump stops and shock travel set how far the suspension can flex before parts touch. Checking these limits before a trip prevents damage to brackets and bushings.
Lift height changes how the shocks sit in their range, so shock length and mounting should be checked after installation. Articulation tests at home let you see where tires meet the stops. Re-check fasteners on the track bar and control arms after the first off-road outings.
- Cycle the suspension and watch for contact
- Check tire rub at full steering lock
- Recheck track bar and arm bolts after rough trails
- Keep skid plates and brackets clear of tire contact
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-6836 |
| Lift kit size | 3.5 inches, stage 1 |
| Coil springs | Four linear rate |
| Front control arms | Two heavy-duty DOM tube steel |
| Bushings | TCT in forged housings |
| Shocks | Falcon 2.1 monotube |
| Track bar | JL-specific heavy-duty adjustable front |
| Tire size | 37 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2018 to 2026 Jeep Wrangler JL two-door and four-door models, covering 80th Anniversary, Freedom, Islander, Rubicon, Sport and Sport S versions and the Unlimited versions of several trims, including Unlimited Moab and Unlimited High Altitude.
The Gladiator does not fit this kit. Confirm the exact 4xe or 392 version before ordering, along with your year, model and trim.
Installation notes
The control arms, the new track bar and the rear track bar relocation bracket change the front and rear geometry, so an alignment and a driveline angle check should follow installation. Check the bump stop extensions for clearance at full articulation.
What’s included
The kit includes the two front DOM tube steel control arms with TCT bushings, four linear rate coil springs, bump stop extensions, the Falcon 2.1 monotube shocks, the new rear track bar relocation bracket and the JL-specific adjustable front track bar.









