Overview
The Pro Comp 4-inch Lift Kit with PRO-X Shocks, part number EXPK5079T (kit K5079T), is a stage 1 suspension lift for 2007 to 2021 Toyota Tundra trucks in 2WD and 4WD. It fits the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail versions.
The kit installs without cutting the factory cross members and gives clearance for 35-inch tires. Extended steering knuckles keep the rack and pinion steering unit in its factory location, which preserves the factory steering geometry. It provides 4 inches of stage 1 lift, with a lift height range of 4 to 5.5 inches.
The front lower crossmembers are one-piece and CNC laser cut. The knuckles and crossmembers work together for durability and easier installation. The suspension keeps CV axle angles in range and allows full compression and extension without binding ball joints.
The system is fully compatible with the factory VSC electronic stability control. The rear uses a block or spacer with a block and U-bolt component and add-a-leafs, and PRO-X shocks are included at the front and the rear.
Key features
- 4-inch stage 1 suspension lift
- Extended steering knuckles that keep the rack and pinion in the factory location
- One-piece laser-cut lower crossmembers
- Clearance for 35-inch tires
- Compatible with the factory VSC stability control
Checking steering and tire clearance
Steering geometry changes whenever the ride height rises, which is why a lift with extended knuckles is designed to keep the steering components in their factory positions. Even so, any lift changes the way the front end moves, so a tie rod, drag link and steering damper are worth inspecting once the truck is driving normally again.
Tire size matters more than many buyers expect. Larger tires add weight and rotating mass, which can strain the front axle, wheel bearings and the steering gear. Wheel offset and backspacing decide whether a wheel rubs at full lock, so test the turn radius on a level surface before loading the truck for a trip.
Stability control and braking systems are sensitive to changes in wheel and tire size. If warning lights come on or the truck feels unsettled in corners, check the tire pressure and the alignment first, then look at the wheel speed sensors.
- Check alignment after the first week of driving
- Inspect ball joints and tie rods for play
- Test turning at full lock for rubbing
- Keep tire pressures matched on all four corners
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK5079T |
| Kit code | K5079T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 4 inches stage 1; range 4 to 5.5 inches |
| Tire size | 35 inches |
| Rear lift method | Block or spacer |
| Rear lift component | Block and U-bolt with add-a-leafs |
| Shocks included | Yes |
| Front shocks | PRO-X |
| Rear shocks | PRO-X |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2007 to 2021 Toyota Tundra across the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail versions.
The list does not include the 2006 and earlier Tundra or the 2022 and newer models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit uses extended steering knuckles and keeps the factory rack and pinion in place, the alignment should be checked after installation.
What’s included
The 4-inch stage 1 lift kit with PRO-X front and rear shocks, the extended steering knuckles, and the one-piece lower crossmembers.


















