Overview
The ReadyLift 44-5675 is a 6-inch lift kit for the Toyota Tundra. It fits 2007 to 2021 Tundra models in the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5 and Trail versions. The kit is for 35-inch tires, uses a block and spacer rear lift, and comes in a 6-inch lift size.
The front uses laser cut, CNC bent, welded and boxed sub frame drop assemblies to hold suspension geometry in place. The iron knuckles are CNC machined for a precise fit, and the factory tie rods can be kept with minor trimming. The 6 inches of lift comes from steel offset spacers attached to the factory strut. The offset design keeps the factory ride and does not widen the track, so the front tires sit no further out than the rear tires. Factory 20-inch wheels can be used, with the spare tire if needed.
Key features
- 6-inch lift from steel offset spacers on the factory struts
- Laser cut, CNC bent, welded and boxed sub frame drop assemblies
- CNC machined iron knuckles
- Factory tie rods can be retained with minor trimming
- Differential drop kit designed for easy installation
- OEM-style cast iron rear lift blocks with longer U-bolts
- Bump stop extensions and sway bar frame mount brackets
Front geometry and wheel fit
The front end carries most of the change in a Tundra lift. Sub frame drops and offset spacers move the steering and suspension points, so tie rod, knuckle and brake line positions should be checked after the install. Keeping the factory tie rods with minor trimming works only when the new angles still leave enough steering travel.
Driveline angles change with the lift, so CV axle angles and differential position need a look. Tire diameter and wheel offset also set how close the tires come to the fender and frame, so measure clearance at full lock and full compression. A front end that keeps its factory ride is easier to balance against the rear.
- Check steering lock clearance with the tires you plan to run
- Inspect CV boots after the first drives at the new height
- Confirm brake hose length at full droop
- Recheck torque on sub frame and knuckle hardware after a few drives
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY44-5675 |
| Lift kit size | 6 inches |
| Rear lift method | Block and spacer, cast iron OEM style |
| Tire size | 35 inches |
| Shocks | None included |
| Fitment type | Direct fit |
Vehicle fitment
2007 to 2021 Toyota Tundra models in the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5 and Trail versions.
The TRD Pro versions are covered by a separate ReadyLift kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The sub frame drops, offset spacers and differential drop change the front geometry, so check wheel alignment after the install. The differential drop is engineered to keep the CV axle and driveline angles in range, and the driveline should be checked on the truck.
What’s included
The kit includes the sub frame drop assemblies, the CNC machined iron knuckles, the offset spacers, the differential drop parts, the OEM-style cast iron rear lift blocks with longer U-bolts, the bump stop extensions and the sway bar frame mount brackets.









