Overview
The ReadyLift 44-39600 is a 6-inch front and 5-inch rear lift kit with Falcon 1.1 monotube shocks for 2019 to 2022 Chevrolet Silverado 1500 and GMC Sierra 1500 4WD trucks. The kit is not for Trail Boss or AT4 trims. It fits Silverado 1500 Custom, High Country, LT, LTZ, RST, SSV and WT versions for 2019 to 2021 and the Silverado 1500 LTD for 2022, and Sierra 1500 Base, Elevation, SLE and SLT versions for 2019 to 2021 and the Sierra 1500 Limited for 2022.
The kit uses angled and offset top mount strut extensions that realign the struts, which improves shock performance and reduces wear. A lower mount strut pre-load spacer gives a slight increase in spring rate to suit the larger wheels and tires. Boxed steel front and rear cross members, a full width front skid plate of 3/16-inch plate steel and 1/4-inch boxed differential drop brackets are included. At the rear, 5-inch fabricated steel blocks with bump stop landings and Falcon 1.1 monotube rear shocks are fitted.
Key features
- 6-inch front lift
- 5-inch rear lift with fabricated steel blocks
- Angled and offset top mount strut extensions
- Lower mount strut pre-load spacer
- Boxed steel front and rear cross members
- Full width front skid plate of 3/16-inch plate steel
- 1/4-inch boxed plate steel differential drop brackets with double gussets
- Falcon 1.1 monotube shocks
Choosing tire size
Tire size is the main decision for a 4WD Silverado or Sierra with this lift. The kit allows 35×12.50 on 20×9 wheels with 0 offset without trimming, and larger combinations need trimming of the front valance and mud flaps. Trimming is a common step with a lift this size, so plan for it before mounting bigger tires.
The top mount strut extensions and pre-load spacer change suspension geometry, so a fresh alignment is part of the install. Spring rate also rises slightly with the spacer, which can firm the ride over sharp bumps. Inspect the steel cross members and skid plate after off-road use, and check the differential drop brackets for loose bolts, since driveline angles shift with the new height.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY44-39600 |
| Front lift | 6 inches |
| Rear lift | 5 inches, fabricated steel blocks |
| Shocks | Falcon 1.1 monotube |
| Skid plate | 3/16-inch plate steel, full width |
| Tire fit | 35×12.50 with no trimming on 20×9 wheels with 0 offset |
| Drive type | 4WD only |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2019 to 2021 and 2022 Chevrolet Silverado 1500 and GMC Sierra 1500 models in the listed versions, including the Silverado 1500 LTD and Sierra 1500 Limited for 2022.
The kit is not for Trail Boss or AT4 trims. Verify the year, model and trim against your truck before ordering.
Installation notes
The angled top mount strut extensions and lower mount pre-load spacer change front geometry, so a wheel alignment belongs after installation. The differential drop brackets change the driveline angles, so check them on the truck. Larger tire combinations require trimming of the front valance and the mud flap at the front and rear well edges.
What’s included
The kit includes the top mount strut extensions, the lower mount pre-load spacer, the boxed steel cross members, the skid plate, the differential drop brackets, the 5-inch rear blocks with bump stop landings and the Falcon 1.1 monotube rear shocks.









