Overview
The ReadyLift 26-5550 is a 5 inch rear lift block set for 2005 to 2021 Toyota Tacoma trucks with 6 lug studs, in 2WD and 4WD. It fits the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Sport and Trail trims.
The set is for Tacomas with the 6-lug wheel pattern and does not fit other stud counts. It raises the rear of the truck by 5 inches.
ReadyLIFT describes rear block sets as a way to raise the rear of a truck for heavy towing or hauling, or to give it a more raked stance. The company says blocks can help when the rear of a truck has settled or sagged over time, and that a block set can bring the rear back to the height the owner wants.
The expanded block line covers rear lift from 1 inch to 6 inches depending on the vehicle. The kit includes longer U-bolts designed for the vehicle and lift amount, and it is engineered to keep the pinion angle, factory bump stop distance and locator pin position correct.
Key features
- 5 inch rear lift for 6-lug Tacomas
- Works on 2WD and 4WD models
- Longer U-bolts designed for the vehicle and lift amount
- Correct pinion angle and bump stop distance.
- Locator pin for installation.
Tacoma rear lift considerations
Rear block sets change the rear height only, so the front end stays where it was. Owners often compare the rear height with the front before choosing a set, especially when the truck is used for hauling. Measuring the ride height on both ends gives a clear picture of the stance.
After installation, check the U-bolts and bump stops early, since the axle sits in a new position. Watch for rubbing at the tires or the brake lines on the first drives, and look at the shocks and springs for wear. Many Tacoma owners inspect the rear suspension during routine service to keep the lift working well.
- Recheck U-bolts after the first drives
- Watch for tire rubbing on the first trips
- Inspect shocks and springs at service
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY26-5550 |
| Product type | Rear lift block set |
| Lift height | 5 inches |
| Stud pattern | 6 lug |
| Drive type | 2WD and 4WD |
| Fitment type | Direct fit |
| Vehicle | Toyota Tacoma, 2005 to 2021 |
Vehicle fitment
Tacomas without the 6-lug stud pattern are not covered, and the TRD Pro and X-Runner trims are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Tacomas without the 6-lug stud pattern are not covered, and the list does not include the TRD Pro or X-Runner trims. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The set is a 5 inch rear lift block set. Check the package contents against your installation before starting.









