Overview
The ReadyLift 66-2740 is a 4 inch tapered rear block kit for 4WD 2017 to 2021 Ford F-250 Super Duty trucks with a 1-piece driveshaft. It also covers 2017 to 2018 F-350 Super Duty trucks in the same trims.
The blocks are fabricated steel and tapered, with integrated OEM style bump stops. The kit includes two rear blocks, four long E-coated U-bolts and eight nuts and washers. The blocks are based on OEM designs and are not made from lightweight extrusions.
Lift height depends on the factory block the truck has. The blocks put a slight rake back in the truck for hauling or towing and work with the matching suspension leveling kit.
Key features
- 4 inch tapered rear lift blocks in fabricated steel
- Integrated bump stop landing pads
- Four long E-coated U-bolts
- Eight nuts and washers
- Designed for 1-piece driveshaft trucks
Tapered blocks and ride height
A tapered block is thicker at one edge, so the angle it creates matters as much as the height. Fitted correctly, it keeps the driveline and axle geometry close to factory, which helps the truck track and brake as expected. Compare the result with the truck’s factory block height before deciding how much rake is wanted.
Heavy hauling and towing put extra stress on the rear axle, springs and bump stops, so these parts deserve regular attention. Inspect the bump stop tangs for cracks, check the U-bolts for tightness and look for uneven tire wear after the first few weeks. Many owners also check the front suspension when the rear is raised to keep the stance balanced.
- Check bump stop tangs for cracks
- Look for uneven tire wear in the first weeks
- Review front suspension height for balance
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-2740 |
| Product type | Tapered rear block kit, fabricated steel |
| Lift height | 4 inches, varies with the factory block |
| Driveshaft | 1-piece |
| Drive type | 4WD |
| Fitment type | Direct fit |
| Vehicle | Ford F-250 Super Duty, 2017 to 2021; F-350 Super Duty, 2017 to 2018 |
Vehicle fitment
It fits the 2017 to 2021 Ford F-250 Super Duty and the 2017 to 2018 Ford F-350 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
The kit is not for use on 2019 and newer F-350 models, and 2-piece driveshaft trucks need the flat 66-2741 kit instead. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lift height depends on the factory block, so measure the final height after installation. Air spring or load leveling kits that attach to the bump stop tangs do not work with these blocks.
What’s included
The kit includes a pair of tapered rear lift blocks, four extended E-coated U-bolts, eight nuts and washers and the necessary hardware. ReadyLIFT says its block kits come with a Limited Lifetime Warranty.









