Overview
The ReadyLift 66-1202 is a 2 inch rear block kit for 4WD Ram 2500 and Ram 3500 trucks with a single rear wheel. It is not for models with the camper package or overload springs, and it does not fit trucks with rear coil springs.
The kit is built from OEM style cast iron blocks, which ReadyLIFT says are not made from lightweight extrusions. Each kit includes two blocks, four E-coated U-bolts and eight nuts and washers. The blocks have an integrated centering pin, and the U-bolts are extended to suit the added height.
A single block per side avoids stacking blocks, which may be illegal in some states. Fitment covers the 3500 only through 2013, so confirm the model year against your truck before ordering.
Key features
- 2 inch rear lift with cast iron blocks
- Integrated centering pin
- Extended U-bolts and hardware
- Single block per side, avoiding stacked blocks
- Four E-coated U-bolts and eight nuts and washers
Before installing a rear block kit
A rear block sits between the leaf spring and the axle, raising the rear of the truck without changing the front. Because the height change comes from the block, the rear end can look level when the front is still at stock height, so a rear block kit suits owners who want a more even stance or who need extra rear clearance for loads.
Cast iron blocks are heavier than extruded aluminum ones, and they add weight to the rear axle area, which some owners consider when setting up a truck for towing. Check the U-bolts and nuts for thread damage before fitting, and retighten after the first few drives, since the clamp load settles as the parts seat.
Because a block changes the spring angle, driveline angles change too. Look for vibration, clunks from the driveshaft, or worn U-bolt threads after installation. Pair the kit with a driveline check and a wheel alignment, which are often needed with any rear lift.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-1202 |
| Product type | Rear block kit, OEM style |
| Lift height | 2 inches |
| Block material | Cast iron |
| Drive type | 4WD |
| Rear wheels | Single rear wheel, non-camper, without overload springs |
| Fitment type | Direct fit |
| Vehicle | Dodge Ram 2500 and 3500, 2003 to 2013 |
Vehicle fitment
Fits the 2003 to 2010 Dodge Ram 2500 in the Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX and TRX4 trims, and the 2003 to 2010 Dodge Ram 3500 in the Laramie, SLT, ST, SXT, Sport and TRX4 trims.
The list also covers the 2011 to 2013 Ram 2500 and 3500 in the trims named on the list, which include Big Horn, Laramie, Laramie Longhorn, Lone Star, Power Wagon, SLT, ST, Tradesman and Outdoorsman for the 2500.
Trucks with rear coil springs, camper packages or overload springs are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes two rear blocks, four E-coated U-bolts, eight nuts and washers, and the extended U-bolts and hardware. The blocks are cast iron.









