Overview
The ReadyLift 26-2765 is a 6.5 inch tall tapered rear lift block kit for 2017 to 2021 Ford F-250 and F-350 Super Duty trucks. It fits the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
ReadyLIFT describes rear block kits as a way to raise the back of a truck for heavy towing or hauling, to create a more raked stance, or to bring a sagging rear back to the height the owner prefers. The company says these blocks are the solution when more rear height is needed than a leveling kit provides, and that they are designed to work with its suspension leveling kits.
ReadyLIFT says its first rear block kit was released in 2007 and that the current line covers rear lift from 1 inch to 6 inches depending on the vehicle. The company also says each kit includes longer U-bolts designed for the vehicle and the amount of lift, and that the blocks are engineered to keep the correct pinion angle, factory bump stop distance and locator pin position.
Because this kit is listed at 6.5 inches, it is above the 6-inch top of the range ReadyLIFT quotes for its line. Confirm the height and the fit for your truck with ReadyLIFT before choosing it.
Key features
- Tapered 6.5 inch rear lift blocks
- Fits 2017 to 2021 Super Duty F-250 and F-350 trucks
- Longer U-bolts sized for the lift amount.
- Pinion angle and bump stop distance engineered.
- Designed to work with ReadyLIFT suspension leveling kits
Tall blocks and rear geometry
Taller rear blocks move the axle further from the frame, which changes driveline angle and how the rear suspension travels. Tapered blocks change the angle by design, so driveline geometry is part of the decision. Measuring the driveline angle before and after installation helps confirm the setup suits the truck.
Heavy towing and hauling put more load on the rear springs and shocks, so these parts should be checked on a regular schedule. Look for vibration, uneven tire wear and bump stop contact on the first drives, and recheck the U-bolts after a short run. Worn parts are often replaced while the rear is apart.
- Check driveline angle after installation
- Watch for vibration at highway speed
- Inspect springs and shocks on a schedule
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY26-2765 |
| Product type | Tapered rear lift block kit |
| Lift height | 6.5 inches |
| Fitment type | Direct fit |
| Vehicle | Ford F-250 and F-350 Super Duty, 2017 to 2021 |
Vehicle fitment
It fits the 2017 to 2021 Ford F-250 Super Duty and 2017 to 2021 Ford F-350 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
Model years outside 2017 to 2021 and other Super Duty trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a tapered 6.5 inch rear lift block kit. Check the package contents against your installation before starting.









