Overview
The ReadyLift 66-3003 is a 3 inch rear block kit for 2WD and 4WD GM 1500 trucks with 6-lug studs. It fits 1999 to 2017 classic and current body style trucks, and it covers the 1999 to 2021 GMC Sierra 1500 in several trims.
The kit includes two 3 inch OEM style cast iron blocks with built-in anti-rotation ears, four E-coated U-bolts and eight nuts and washers. The blocks lift the rear an additional 1 inch to 3 inches depending on the application, and they are cast iron rather than lightweight extrusions.
Owners with 1.25 inch OEM blocks gain an extra 1.75 inches of lift from this kit, which suits towing and hauling, especially with a front leveling kit. On 1999 to 2006 4WD trucks, the kit replaces the factory 2 inch block for 1 inch of additional lift. The single block per side avoids stacking, which may be illegal in some jurisdictions.
Key features
- 3 inch cast iron rear blocks with OEM style construction
- Anti-rotation ears built into the blocks
- Extended E-coated U-bolts
- All required hardware included
- Single block per side to avoid stacking
Lift height and stacking
A 3 inch rear block is a larger change than a typical rear block, and the effect on the truck depends on the blocks already in place. Owners who run older factory blocks will see a bigger gain than those who already have a block installed. Because the blocks lift the rear, the front may look lower by comparison, so a front leveling kit is a common match. Higher rear height also affects driveline angles and the position of the rear axle, so measure before and after to confirm the result.
Blocks that are stacked can shift the axle and put stress on the bracket and U-bolts, which is why a single block per side design is often preferred. Check the shocks for length, since the rear travel changes. Inspect the U-bolts and the brake lines after the first drives, and retorque the nuts on a regular schedule. Good rear springs in decent condition make the block work better, so look for sagging or worn bushings before installing.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-3003 |
| Product type | Rear block kit, OEM style |
| Lift height | 3 inches |
| Block material | Cast iron |
| Drive type | 2WD and 4WD |
| Stud pattern | 6-lug |
| Installation time | About 1.8 hours |
| Fitment type | Direct fit |
| Vehicle | GM 1500, 1999 to 2021, 6-lug |
Vehicle fitment
It is a direct fit for the 1999 to 2021 GMC Sierra 1500 in the AT4, Base, C3, Denali, Elevation, HT, Hybrid, SL, SLE, SLT, WT and XFE trims, for the 2007 GMC Sierra 1500 Classic in the Denali, Hybrid, SL, SLE, SLT and WT trims, and for the 2019 GMC Sierra 1500 Limited in the Base and SLE trims.
Trucks without a 6-lug stud pattern are not covered. Longer shocks or a shock extension may be needed. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes about 1.8 hours. Longer shocks or the ReadyLIFT shock extension, part 67-3809, may be required, so check your shock length before starting.
What’s included
The kit includes two 3 inch rear blocks, four extended E-coated U-bolts, eight nuts and washers, and all required hardware. ReadyLIFT says all of its block kits come with a lifetime warranty.









