Overview
The ReadyLift 26-5003 is a 3 inch rear lift block set for 2007 to 2021 Toyota Tundra trucks in 2WD and 4WD. It fits the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5 and Trail trims, and it raises the rear by 3 inches.
Rear block sets raise the back of a truck when more height is needed for towing or hauling, or when a more raked look is wanted. They can also bring a rear that has settled back to the height the owner prefers. The kit is engineered so the rear lift is correct for the amount of lift.
The set includes proprietary longer U-bolts designed for the Tundra and the 3 inch lift. The blocks are engineered to keep the correct pinion angle, factory bump stop distance and locator pin position, which keeps installation straightforward. It works on both 2WD and 4WD trucks.
Key features
- 3 inch rear lift for 2007 to 2021 Tundra
- Proprietary longer U-bolts for the vehicle and lift amount
- Engineered for correct pinion angle.
- Maintains factory bump stop distance and locator pin position.
- Works for 2WD and 4WD Tundras
Choosing and checking a rear lift
Rear block sets change the height of the rear axle relative to the frame, so the front of the truck can look lower by comparison. Many owners weigh the rear height against the front before choosing a block size, especially when the truck will be loaded for towing. Measuring the ride height before and after the change gives a clear picture of the result.
After installation, recheck the U-bolt nuts after the first few drives and again at routine service intervals. Inspect the brake lines and rear driveline for stretch or binding, since the axle sits in a new position. Worn rear springs, bushings or shock mounts are often replaced at the same time, so look at those parts while the rear is apart.
- Recheck U-bolt nuts after the first few drives
- Inspect brake lines and driveline after installation
- Look at worn springs and shock mounts while the rear is apart
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY26-5003 |
| Product type | Rear lift block set |
| Lift height | 3 inches |
| Drive type | 2WD and 4WD |
| U-bolts | Proprietary longer design |
| Fitment type | Direct fit |
| Vehicle | Toyota Tundra, 2007 to 2021 |
Vehicle fitment
It fits the 2007 to 2021 Toyota Tundra in the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5 and Trail trims.
Tundra trims other than those named above, and Toyota models other than the Tundra, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
The set comes with 3 inch rear lift blocks and extended U-bolts for the added height. Check the package contents against your installation before starting.









