Overview
The ReadyLift 26-2104 is a 4 inch OEM style rear block kit for 2004 to 2019 Ford F-150 trucks in 2WD and 4WD. It also fits 2017 to 2019 Ford Raptors, and coverage runs through 2020 for the trims named below.
Two 4 inch blocks come with four E-coated U-bolts and eight nuts and washers. The blocks are OEM based, not lightweight extrusions, and they have integrated OEM style bump stop landings and cast-in center pins for locating them. Each kit includes the U-bolts and nuts needed for installation.
The kit adds rake for towing or hauling and suits stock height trucks as well as lifted or leveled trucks. The block design means stacking is not needed. The kit carries a Limited Lifetime Warranty.
Key features
- 4 inch rear lift with two OEM style blocks
- Integrated OEM style bump stop landings
- Cast-in center pins for locating the blocks
- Four E-coated U-bolts and eight nuts and washers
- Designed to work with ReadyLIFT suspension leveling kits
Checking the rear after installation
Rear blocks raise the rear axle without changing the front, so the stance changes once the kit is in. A block set is usually considered when the rear sags under load or when more height is needed for towing. Measure the height before and after installation to see the actual change on the truck.
Brake lines, the rear driveline and the bump stops all sit in a new position after a block install. Look for tight lines, vibration or rubbing on the first drive, and recheck the U-bolt nuts after a short run. Shock mounts and springs are worth a look while the rear is accessible.
- Check brake lines for tension after installation
- Watch for driveline vibration on the first drive
- Recheck U-bolt nuts after a short run
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY26-2104 |
| Product type | Rear block kit, OEM style |
| Lift height | 4 inches |
| Block material | OEM based, not lightweight extrusion |
| Drive type | 2WD and 4WD |
| Fitment type | Direct fit |
| Vehicle | Ford F-150, 2004 to 2020, 2WD and 4WD |
Vehicle fitment
It fits the 2004 to 2020 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, Police Responder, Raptor, SSV, STX, 60th Anniversary Edition, XL and XLT trims.
Ford F-150 model years outside 2004 to 2020 are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes two 4 inch rear blocks, four E-coated U-bolts and eight nuts and washers.









