Overview
The ReadyLift 66-2741 is a 4 inch flat rear block kit for 4WD 2017 to 2021 Ford F-250 Super Duty trucks with a 2-piece driveshaft. It also covers 2017 to 2018 F-350 Super Duty trucks in the same trims.
The kit uses fabricated steel blocks in an OEM style with integrated bump stop landing pads. It includes two rear blocks, a billet driveline spacer, four long E-coated U-bolts and eight nuts and washers. Lift height varies with the factory block the truck already has.
The blocks are based on OEM designs and are not made from lightweight extrusions. The kit puts a slight rake back in the truck for hauling or towing and works with the matching suspension leveling kit.
Key features
- 4 inch flat rear lift blocks in fabricated steel
- Integrated bump stop landing pads
- Billet driveline spacer for 2-piece driveshaft trucks
- Four long E-coated U-bolts
- Eight nuts and washers
Driveline and bump stop checks
A 2-piece driveshaft changes the driveline angle when the rear is raised, and the billet spacer keeps the joints working in the right geometry. Before fitting, look at the driveshaft to confirm the setup and check the center support bearing for wear. Measure the existing driveshaft angles if the truck has been modified before.
Bump stops take load when the suspension compresses, so their landing pads should sit squarely against the block after installation. Examine the pads and tangs for cracks or distortion during routine service. Heavy towing and hauling put extra load on these parts, so inspect them more often on trucks that work hard.
- Confirm the driveshaft setup before ordering
- Inspect the center support bearing for wear
- Check bump stop pads for cracks or distortion
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-2741 |
| Product type | Flat rear block kit, fabricated steel |
| Lift height | 4 inches, varies with the factory block |
| Driveshaft | 2-piece |
| Drive type | 4WD |
| Fitment type | Direct fit |
| Vehicle | Ford F-250 Super Duty, 2017 to 2021; F-350 Super Duty, 2017 to 2018 |
Vehicle fitment
It fits the 2017 to 2021 Ford F-250 Super Duty and the 2017 to 2018 Ford F-350 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
The kit is not for 2019 and newer F-350 models, and 2WD trucks are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit is for 2-piece driveshaft trucks, and the billet driveline spacer is included for that setup. Air spring or load leveling kits that attach to the bump stop tangs do not work with these blocks, and using one voids the block warranties.
What’s included
The kit includes a pair of flat rear lift blocks, a billet drive line spacer, four extended E-coated U-bolts, eight nuts and washers, and the necessary hardware. ReadyLIFT says its block kits come with a Limited Lifetime Warranty.









