Overview
The ReadyLift 69-72200 is a 2-inch SST lift kit for the 2022 and 2023 Hyundai Santa Cruz in the Limited, SE, SEL and SEL Premium versions. It gives an equal 2 inches of lift at the front and rear and is completely bolt-on. It allows a 255/70-17 tire on an 8-inch wide wheel with +38 offset without rubbing.
The front uses precision laser-cut, heavy-duty fabricated steel strut extensions. The rear uses CNC-machined billet aluminum coil spring spacers. Front sway bar drop extensions keep the factory end links in place, which keeps the factory driving characteristics. The kit was developed as a vehicle-specific design for the Santa Cruz, drawing on the Hyundai Tucson and Kia Sportage platforms.
Key features
- 2 inches of lift at both the front and the rear
- Laser-cut, heavy-duty fabricated steel front strut extensions
- CNC-machined billet aluminum rear coil spring spacers
- Front sway bar drop extensions that keep the factory end links
- Completely bolt-on installation
- Fits 255/70-17 on an 8-inch wide wheel with +38 offset
Sway bar links and end links
The sway bar links connect the sway bar to the suspension, and they carry load each time the body rolls in a turn. On a lifted truck, the links sit at a different angle than stock, so their movement matters. Keeping the factory end links in place, as this kit does through the drop extensions, avoids adding new links that would need separate fitting and checking.
The links are a common wear item on lifted trucks, especially on rough roads. Look for clunking over bumps, torn boots or loose hardware. The rear spacers and tire clearance also need attention, because a tire moving toward the fender can rub a link or brake line over time. Recheck the hardware after the first few drives.
- Inspect the sway bar bushings for cracks
- Check the end link ball joints for play
- Tighten sway bar hardware after the first drive
- Watch the rear spacers for rubbing against the body
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-72200 |
| Front lift | 2 inches |
| Rear lift | 2 inches |
| Front components | Laser-cut, heavy-duty fabricated steel strut extensions |
| Rear spacer material | CNC-machined billet aluminum |
| Maximum tire size | 255/70-17 on an 8-inch wide wheel, +38 offset |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2022 and 2023 Hyundai Santa Cruz models in the Limited, SE, SEL and SEL Premium versions.
Santa Cruz model years outside 2022 and 2023 are not covered. Match your model year and version against this kit before ordering.
Installation notes
The installation is completely bolt-on. The factory end links stay in use through the sway bar drop extensions, which keeps sway bar geometry. An alignment check after installation is advisable for a 2-inch lift. Check the clearance of the rear spacers and the tire at full compression during the install.
What’s included
The kit includes the laser-cut steel front strut extensions, the CNC-machined billet aluminum rear coil spring spacers and the front sway bar drop extensions.









