Overview
The ReadyLift 44-3050 is a 5-to-6-inch adjustable lift kit for 2011 to 2019 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD 4WD trucks. It has adjustable lift height and includes four ReadyLift SST3000 shocks. It fits Silverado 2500 HD and 3500 HD High Country, LT, LTZ and WT versions, and Sierra 2500 HD and 3500 HD Base, Denali, SLE, SLT and WT versions.
Tires up to 35 inches fit this kit, and the rear uses a block and spacer method. The kit is a 5-to-6-inch lift with SST3000 shocks. Check the package contents against your installation before starting.
Key features
- 5-to-6-inch adjustable lift range
- Four ReadyLift SST3000 shocks included
- Designed for 2011 to 2019 HD trucks
- Tires listed at 35 inches
- Block and spacer rear lift method
Adjustable lift and shock setup
An adjustable lift lets the height be set within a range, which helps match the truck to tire size and load. The setting should be measured at the same points before and after changes, so the front and rear stay level. Block and spacer rear lifts raise the rear axle on the existing springs, so rear load capacity and ride should be checked once the setting is chosen.
Shocks need to match the height. Longer shock travel handles the added distance between the body and the axle, and four matched shocks give consistent damping at each corner. Look at shock mounting bushings and bump stop clearance once the lift is set, since a worn bushing can make a new lift feel loose.
- Measure height at the same points before and after changes
- Check rear block contact with the axle at full droop
- Inspect shock mounts and bushings at each service
- Recheck driveline angles at the chosen height
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY44-3050 |
| Lift range | 5 to 6 inches, adjustable |
| Shocks | Four ReadyLift SST3000 |
| Tire size | 35 inches |
| Rear lift method | Block and spacer |
| Drive type | 4WD |
| Fitment type | Direct fit |
Vehicle fitment
Chevrolet Silverado 2500 HD and 3500 HD models in the High Country, LT, LTZ and WT versions, and GMC Sierra 2500 HD and 3500 HD models in the Base, Denali, SLE, SLT and WT versions.
2010 and earlier HD trucks and 2020 and later models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 5-to-6-inch lift changes front geometry and driveline angles, so check wheel alignment and driveline angles after installation. Follow the instructions packed with the kit.
What’s included
The kit includes four ReadyLift SST3000 shocks. Check the package contents against your installation before starting.









