Overview
The Raceline A94R Krank UTV wheel in 14×7 with a 4 on 110 bolt pattern and red finish, part number RLWA94R-4701110, is a non-beadlock aluminum wheel for UTVs.
Raceline describes its consumer line as an extension of the wheels it builds for off-road racing. The A94R has a 14 inch diameter, a 7 inch width and a 10 offset, with a 5+2 backspace.
Beadlock is set to no on this wheel, so it is a standard wheel rather than a beadlock design. The finish is red on aluminum.
The A94R is part of the Krank line in Raceline’s consumer range, and it is offered in a red finish with aluminum construction.
Without a beadlock ring, a non-beadlock wheel relies on the tire bead seating against the rim, so it is worth confirming that the tire you choose is designed for this type of wheel.
Key features
- Non-beadlock design
- Red finish
- Offset of 10 with a 5+2 backspace
- 4 on 110 bolt pattern
- Krank style from the A94R line
Choosing UTV wheel offset
Offset describes how far the mounting face sits from the centerline of the wheel. A lower offset pushes the wheel outward, which changes how the tire sits in the fender and how close it gets to the control arms. Backspace works the other way, measuring the distance from the mounting face to the inside lip, so it shows how much room the wheel leaves behind the mount for brakes and suspension.
Non-beadlock wheels rely on a tight tire bead against the rim, so the tire choice matters more than it would on a beadlock design. Tire pressure should stay within the range suited to the tire, because a sudden drop can unseat the bead. Run lower pressures with care on rough terrain, and carry a tire inflator so the bead can be reseated if needed.
Check the wheels after the first few trail runs. Look at the lug nut torque, the valve stem and any signs of bead creep on the rim edge. Aluminum rims can bend or crack after a hard hit, so inspect the rim lip before reusing a wheel after a big impact.
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLWA94R-4701110 |
| Style | A94R Krank |
| Wheel type | UTV |
| Diameter | 14 inches |
| Width | 7 inches |
| Bolt pattern | 4 on 110 |
| Offset | 10 |
| Backspace | 5+2 |
| Beadlock | No |
| Finish | Red |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit wheel, so it is not built for a specific UTV. The 4 on 110 bolt pattern and 10 offset must match your hub and clearance before ordering.
The 4 on 110 bolt pattern is the first measurement to check, followed by the 10 offset and the 5+2 backspace. Together they decide whether the wheel clears brakes and suspension on your vehicle.
Because this is a non-beadlock wheel, the tire needs to seat on the rim without a separate ring, so match the tire type to the wheel before mounting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The wheel is described on its own. No center cap or hardware is listed.
Not included: Tires.









