Overview
The Method Race Wheels 411 UTV Bead Grip is a 15×7 titanium UTV wheel with a 4 on 156 bolt pattern and a 5+2 backspace. It uses the 411 style of Method’s Bead Grip design, which is built to hold the tire bead when the tire runs at low pressure.
A safety hump on the bead seats is designed to resist de-beading. The wheel is one-piece 356 aluminum with T6 heat treatment and is built for off-road use.
This 411 is a 15×7 wheel, so the tire sized to it must fit a 15 diameter rim with a 7 width. Its 4 on 156 bolt pattern places four lug holes on a 156 bolt circle, which is a different pattern from the 136 bolt pattern on the 410, so the two cannot be swapped on the same hub. The 5+2 backspace sets the mounting face to inner edge distance, which changes how far the tire sits inside the fender compared with a 4+3 wheel. Method gives no load rating or weight figure for the wheel, so check those with the manufacturer before using it for hard trail work.
Key features
- Bead Grip technology for tire bead grip
- Safety hump on the bead seats
- One-piece 356 aluminum body
- T6 heat treatment
- Non-beadlock design
- Titanium finish
Matching bolt patterns across UTVs
Bolt pattern and bolt circle decide which hubs a wheel can use. Four lug holes on a 156 bolt circle are a different pattern from a 136 bolt circle, so wheels from different groups cannot be swapped without a change in hub or adapter. Mark the wheel and hub with the pattern before stocking tires, so the right set goes on the right vehicle.
Backspace also changes how the tire sits in the fender and how close it comes to steering and brake parts. Compare the mounting face to inner edge distance with your current wheels before buying, especially if the tires are wider than stock.
- Confirm bolt circle before buying wheels
- Compare backspace with the current setup
- Keep matching hardware for each wheel group
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR41157046852 |
| Style | 411 UTV Bead Grip |
| Wheel type | UTV |
| Wheel size | 15×7 |
| Backspace | 5+2 |
| Bolt pattern | 4 on 156 |
| Finish | Titanium |
| Beadlock | No |
| Construction | One-piece 356 aluminum |
| Heat treatment | T6 |
Vehicle fitment
It is a universal fit wheel. A 15×7 wheel with a 4 on 156 bolt pattern and 5+2 backspace has to match your hub and clearance. Confirm the year, model and trim of your UTV before buying, and confirm the load rating for your use before hard trail work.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation, and plan for the mounting hardware your UTV needs before starting.
Not included: tires.











