Overview
The G2 Axle and Gear GM 14B 10.5-inch Master Ring and Pinion Install Kit, part number 35-2023B, is a master ring and pinion install kit for the GM 14B axle in the 10.5-inch size. UPC 631410126587 identifies the kit.
Master kits are the larger grouping in G2’s ring and pinion line, so the title is the quickest way to tell this kit apart from minor versions.
Choosing a master kit
Choosing a ring and pinion kit starts with the axle. The GM 14B housing and carrier must match the ring gear diameter and pinion flange, so measure the housing before buying. A master set carries more than one part of the gear package, which makes it a bigger job than a minor refresh. Plan on new bearings and seals as well when the gear set changes.
Setup time is the largest cost after the parts. Pinion depth, carrier preload and backlash all interact, and changing one moves the others. Use a fresh crush sleeve or shim pack, record every measurement, and test the contact pattern before the axle goes into service.
- Measure the carrier bearing bore and ring gear diameter
- Budget for bearings, seals and fluid
- Log shim thickness and preload readings
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2023B |
| UPC | 631410126587 |
| Kit type | Master |
| Axle | GM 14B, 10.5-inch |
Vehicle fitment
It is for the GM 14B axle in the 10.5-inch size. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth and bearing preload on a master set should be checked by a qualified gear technician, not set by trial and error.
What’s included
Have a qualified gear technician check pinion depth and bearing preload before installation.








