Overview
The Pro Comp 930001B is a PRO-X twin tube rear shock absorber for the 2011–2018 Ram 1500 in many trims and the 2014–2018 Ram ProMaster 1500 Base. It has a 30.08-inch extended length, an 18.0-inch collapsed length and a 12.08-inch travel length.
The PRO-X is a general-purpose twin tube design for pickups and vans that see mostly pavement, with occasional off-road use. It uses 10-stage velocity sensitive valving to handle varied road conditions, and a 1-3/8-inch nylon banded piston with a 5/8-inch chrome hardened shaft form the working core of the shock.
Both mounts are loop eyes, and the 2.0-inch body is finished in black powder coat. The gas charge is nitrogen stabilized. The optional shock boot is sold as a separate item, so it is not included with the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Pickups and vans in daily use
Ram 1500 pickups and ProMaster vans see a mix of pavement, parking lots and light cargo work, which asks a rear shock to damp both empty and loaded conditions. A general-purpose twin tube keeps the ride controlled through those changes without feeling firm on every bump. Choosing a shock for your typical load is more useful than chasing a single number.
Inspect the loop eyes for cracks at each service, and check for fluid on the body after heavy use. A rear shock that is fading often feels like the back end floats after dips or leans more in turns. Replace shocks in matched pairs on the same axle, and confirm the bushings and hardware are in good shape first.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 930001B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Position | Rear |
| Extended length | 30.08 in |
| Collapsed length | 18.0 in |
| Travel length | 12.08 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2011–2018 Ram 1500 in the Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport, Tradesman and Tradesman HD trims, and the 2014–2018 Ram ProMaster 1500 in the Base trim.
Ram 2500 and Ram 3500 models are not on this list, and Ram 1500 model years from 2019 onward are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the loop eyes against the existing rear bracket, and compare the 30.08-inch extended length with the installed suspension. Check clearance at full compression before driving.
What’s included
One rear twin tube shock with loop eyes at both ends. The boot is not part of this item.
Not included: the optional boot.









