Overview
The ICON V.S. 2.5 Series PBR Shock Absorber Set, part number ICO217715P, is a rear shock set for 2009–2024 Dodge and Ram 1500 trucks, including the 2019–2024 Ram 1500 Classic. It is built for piggyback and remote reservoir layouts.
The set uses a 6061 billet aluminum manifold a few inches below the top cap to create a bump zone. This adds about 20% more damping force, which limits hard bottom-outs and controls the suspension during high-speed compression. The shocks are configured for the truck in length and damping tune and can be rebuilt and revalved.
The set is built for piggyback and remote reservoir layouts. A 6061 billet aluminum manifold sits a few inches below the top cap and forms a bump zone that ICON says adds about 20% more damping force. The shocks are configured for the truck in length and damping tune, and ICON says they are 100% rebuildable and 100% revalveable.
The 2019 to 2024 Ram 1500 Classic is covered alongside the 2009 to 2018 trucks, so confirm the model year and body style before ordering.
Key features
- Bump zone created by a 6061 billet aluminum manifold.
- About 20% additional damping force in the bump zone.
- Designed for piggyback and remote reservoir layouts.
- Configured for the application in both length and damping tune.
- 100% rebuildable and 100% revalveable.
Piggyback layouts explained
A piggyback shock places a separate reservoir beside the shock body, which keeps oil volume higher and helps the damper resist fade. Remote reservoir layouts run the reservoir on a hose, which gives similar benefits with more flexible mounting. Both designs need careful hose and fitting checks.
Rear shocks on pickups often carry more load than expected, so mount wear matters. Check the eye bushings and the top cap for play, and make sure the reservoir hose stays clear of the tire and frame. Revalving or rebuilding later is simpler when the shock was built to be serviced.
- Check reservoir hose clearance across full travel
- Inspect eye bushings for wear
- Confirm the top cap seals are dry
- Keep the shock serviceable with routine checks
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO217715P |
| Shock series | V.S. 2.5 Series PBR |
| Position | Rear |
| Bump zone damping increase | About 20% |
| Fitment type | Direct fit |
Vehicle fitment
Fitment covers the 2009–2010 Dodge Ram 1500, the 2011–2018 Ram 1500 and the 2019–2024 Ram 1500 Classic, across their trim levels. Ram 2500 and 3500 trucks are not included.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A rear shock set. Count the included pieces against the installation steps before you start.