Overview
The Bilstein B4 OE Replacement 19-249230 is a rear shock absorber for the 2014–2019 Ram ProMaster 1500, ProMaster 2500 and ProMaster 3500 vans. It is a twin-tube design with eyelet top and bottom mounts, sold individually with a black paint finish.
The B4 OE Replacement line is engineered to maintain the original ride quality of the vehicle while meeting OE standards. It is designed to restore the original performance and handling of the van.
The body diameter is OEM, so the unit is meant to match the factory size. It is a rear shock for ProMaster vans, and the rear position is the one to match.
Key features
- Rear position
- Twin-tube design
- Eyelet top and bottom mounts
- Black paint finish
- Sold individually
Van load and rear shock wear
ProMaster vans carry heavy and changing loads, so the rear shocks work harder than on a light vehicle. A worn shock can make the rear end bounce after bumps, sag on one side or ride unevenly with a full load. When a replacement is fitted, the mounts and eyelets should line up with the old unit before the bolts are tightened. Inspect the rear bushings and mounting hardware at the same time to make sure the new shock sits square.
Twin-tube shocks like this one are common on work vans because they are simple to service. Check for oil on the shock body after the first few drives, since a small leak can appear once the unit has settled. Keep the rear tires at the correct pressure for the load, and recheck the mounting bolts after the first few days of driving. Matching both rear shocks keeps the van level and the handling predictable.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 19-249230 |
| Shock series | B4 OE Replacement Series |
| Position | Rear |
| Shock type | Twin tube, gas charged |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Body diameter | OEM |
| Finish | Black paint |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2014 through 2019 Ram ProMaster 1500, ProMaster 2500 and ProMaster 3500 vans.
ProMaster vans from before 2014 or after 2019, and other Ram models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Part 19-249230: one rear shock absorber, sold individually.
Installation notes
Because the body diameter is OEM, the unit is meant to take the factory mounts. Check both eyelets against the old shock before tightening.









