Overview
The Pro Comp 929543B is a PRO-X twin tube rear shock absorber for the 2013–2021 Ram 3500 in several trims. It has a 29.98-inch extended length, an 18.24-inch collapsed length and an 11.74-inch travel length, and it is designed for the rear of the truck.
The PRO-X is a general-purpose twin tube design for heavy-duty pickups that see mostly paved roads, with occasional off-road driving. The 10-stage velocity sensitive valving is meant to adjust to different road surfaces, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft are the main working parts.
Both mounts are loop eyes, and the body is finished in black powder coat with a 2.0-inch diameter. The gas charge is nitrogen stabilized. The shock boot is an optional item and is not included with this shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Shock tuning and ride
A twin tube shock uses a working cylinder and a reserve chamber filled with gas, which helps keep damping steady during repeated bumps. Valving controls how quickly the shock resists movement, and velocity sensitive valving changes that resistance with the speed of the suspension. This suits a heavy-duty pickup that moves between paved roads and occasional trails, since the shock responds differently to small and large movements.
Rear shock performance depends on the mounts, bushings and spring condition around it. Worn bushings or a sagging spring can make a new shock feel harsh or loose, so check them when the shock is replaced. Keep the mounts clean and free of rust, and check for leaks or cracked welds during routine service.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929543B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Position | Rear |
| Extended length | 29.98 in |
| Collapsed length | 18.24 in |
| Travel length | 11.74 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2013–2021 Ram 3500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, SLT, ST and Tradesman trims.
Ram 2500 and Ram 1500 models are not on this list, and Ram 3500 years after 2021 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the loop eyes and the 29.98-inch extended length against the existing rear suspension before installation. Confirm clearance at full compression, since the shock is listed with an 18.24-inch collapsed length.
What’s included
One rear shock with loop eyes at both ends. The optional boot is not included in this item.
Not included: the optional boot.









