Overview
The Pro Comp 923504B is a PRO-X twin tube shock absorber with a 23.8-inch extended length and a 14.3-inch collapsed length. It fits the 2004–2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon, the 1997–2006 Wrangler TJ in several trims, and the 2005–2020 Toyota Tacoma in multiple trims including the TRD Off-Road and TRD Pro.
The PRO-X is built as a general-purpose twin tube shock for vehicles used mostly on pavement with occasional off-road driving. It has 10-stage velocity sensitive valving, a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft, with a travel length listed at 9.48 inches.
Both mounts are loop eyes, and the body is 2.0 inches in diameter with a black powder-coated finish. The gas charge is nitrogen stabilized, and the optional boot is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Long travel and clearance
A longer shock adds travel for articulation, which helps tires stay in contact on uneven trails, but the extra length has to fit the suspension at both ends of its stroke. Before choosing a long unit, measure the distance between mounts with the suspension at ride height and again with the wheels hanging. Clearance against the frame, crossmembers and tire at full compression is often the limiting factor.
Tacomas and Wranglers with lift kits often need longer shocks, and bump stops may be worth replacing to cushion the end of the stroke. Look for worn bushings in the loop eyes, rust on the shock body, and a rebound that feels slow or springy. Replacing the loop bushings with the shock avoids a loose fit that can knock on rough trails.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 923504B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 23.8 in |
| Collapsed length | 14.3 in |
| Travel length | 9.48 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler LJ in the Unlimited and Unlimited Rubicon trims, the 1997–2006 Wrangler TJ in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims, and the 2005–2020 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims.
The Wrangler JK generation and the Tacoma years before 2005 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 23.8-inch extended and 14.3-inch collapsed lengths against your suspension height. The loop upper and lower mounts can be matched to the existing hardware, so confirm the mount fits your Jeep or Tacoma before driving.
What’s included
This twin tube shock uses loop eyes at each end. The shock boot is not included in this item.
Not included: the optional shock boot.









