Overview
The Pro Comp 920590B is a PRO-X twin tube shock absorber with a 21.7-inch extended length and a 13.8-inch collapsed length. It fits Chevrolet and GMC trucks and SUVs, including the Silverado and Sierra 1500 from 1999 to 2006, the Avalanche, Tahoe and Suburban, the GMC Yukon and Yukon XL, and the 2000–2013 Suburban 2500 and Yukon XL 2500.
The PRO-X is a general-purpose twin tube design for trucks used mainly on pavement with occasional off-road driving. Pro Comp describes its 10-stage velocity sensitive valving as suited to varied road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft are the same core parts as the rest of the line.
This shock uses an upper loop mount and a lower clevis mount, which means the lower end is a different style from the loop eyes on many other PRO-X shocks. The body is black powder coated and nitrogen stabilized, and the shock boot is an optional extra that is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Clevis lower mount
- Black powder-coated finish
Signs the shock is worn
Shocks on general-purpose trucks wear slowly, so the change in ride is often gradual. A worn unit may let the body bounce several times after a dip, pull to one side under braking, or leave the tires cupped. Look at the body for oil film, which usually means the seal has failed and the damping is gone.
Replace shocks in pairs on the same axle so both sides control the body the same way. Before installing a new unit, inspect the upper and lower bushings and brackets for cracks or corrosion, because a good shock cannot do its job through a worn mount.
- Oil film on the body or shaft
- Bouncing after bumps or dips
- Cupped or uneven tire wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 920590B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 21.7 in |
| Collapsed length | 13.8 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Clevis |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2002–2006 Chevrolet Avalanche 1500, the 1999–2006 Silverado 1500 and the 2007 Silverado 1500 Classic, the 2002–2003 and 2005–2006 Silverado 1500 HD, the 2002–2006 Suburban 1500 and Tahoe, and the 2000–2013 Suburban 2500. On the GMC side it fits the 1999–2006 Sierra 1500, the 2007 Sierra 1500 Classic, the 2002–2003 and 2005–2006 Sierra 1500 HD, the 2002–2006 Yukon and Yukon XL 1500, and the 2000–2013 Yukon XL 2500.
Silverado and Sierra 2500 and 3500 models, and model years after 2013, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The clevis lower mount needs to match the axle bracket on your truck, so check that before final tightening. Compare the 21.7-inch extended and 13.8-inch collapsed lengths with your installed ride height, and check clearance at full droop.
What’s included
One twin tube shock with a loop upper mount and a clevis lower mount. The boot is an optional extra.
Not included: the optional shock boot.













