Overview
The Pro Comp 927504B is a PRO-X twin tube shock absorber with a 27.8-inch extended length, a 16.3-inch collapsed length and an 11.45-inch travel length. It has eyelet mounts at both ends and a 2.0-inch body. Its location is universal.
The PRO-X is a general-purpose twin tube design for vehicles that see mostly paved roads with occasional off-road driving. Its 10-stage velocity sensitive valving handles different road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft are the working parts. It includes a Teflon rebound stop.
The shock is nitrogen stabilized with a black powder-coated finish. Its lengths suit a specific range of vehicles, so confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Eyelet mounts at both ends
- Black powder-coated finish
Measuring before you buy
Measuring the existing shock is the most reliable way to confirm a replacement. Compress the shock by hand to its shortest length and measure eye to eye, then extend it fully and measure again. The difference is the travel. Record both numbers with the mount style so you can compare them against the new unit.
Ride height matters too. Springs, lift kits and larger tires change the position of the mount points, so measure with the vehicle at its normal height rather than on a jack. Keep the old shock as a reference until the new one is installed and checked for clearance at both extremes of its stroke.
- Measure eye to eye at both extremes of travel
- Note the mount style at the top and bottom
- Measure with the vehicle at normal ride height
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 927504B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 27.8 in |
| Collapsed length | 16.3 in |
| Travel length | 11.45 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Eyelet |
| Lower mount | Eyelet |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the 27.8-inch extended and 16.3-inch collapsed lengths with your installed suspension.
Because no vehicles are listed, do not assume fit from the part name alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the existing shock or the installed suspension before ordering, and compare the 27.8-inch extended and 16.3-inch collapsed lengths with those measurements. Check the eyelet mounts against the existing brackets.
What’s included
One twin tube shock with eyelet mounts at both ends. The optional boot is not included.
Not included: the optional boot.









