Overview
The Pro Comp PRO-X 929592B is a gas charged twin tube rear shock with a 29.8-inch extended length and 12.45 inches of travel. It fits 2019 to 2024 Ram 1500 and Ram 1500 Classic trucks, and the 2019 to 2021 Ram ProMaster 1500.
A twin tube shock uses an inner working cylinder inside an outer reservoir tube, a common design for trucks that see mostly pavement with some off-road use. Pro Comp built the PRO-X with a general-purpose twin tube body, 2.0 inches in diameter, and gave it extended lengths for lifted vehicles.
The 10-stage velocity sensitive valving changes damping with shock speed, so ride response shifts with road surface. The 5/8-inch chrome hardened piston rod and Teflon rebound stop support a comfortable highway ride and hold up on rough ground.
Key features
- Gas charged twin tube design
- Nitrogen stabilized body
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft with a Teflon rebound stop
- Black powder coat finish
Before you buy
A gas charged shock carries a nitrogen charge in the reservoir that limits foaming of the oil during hard use. Over time, the damping oil heats up on rough ground, and the charge helps keep the response consistent. The effect is most noticeable on long descents and repeated washboard sections.
Ram trucks with a lift often run tire sizes different from stock, so the shock’s working range matters more. Check that the body, piston rod and mounting hardware are straight and free of dents, since a bent rod can bind the shock. Look for oil on the body, a leaking seal or a clunk over bumps as signs the shock is worn.
- Oil weeping along the shock body
- Bent or pitted piston rod
- Clunking or bouncing after bumps
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929592B |
| Shock series | PRO-X |
| Type | Twin tube, gas charged |
| Location | Rear |
| Extended length | 29.8 inches |
| Collapsed length | 17.1 inches |
| Travel | 12.45 inches |
| Body diameter | 2.0 inches |
| Piston | 1-3/8-inch nylon banded |
| Shaft | 5/8-inch chrome hardened |
| Valving | 10-stage velocity sensitive |
| Finish | Black powder coat |
| Quantity | Individual shock |
Vehicle fitment
It fits the 2019 to 2024 Ram 1500 and Ram 1500 Classic, and the 2019 to 2021 Ram ProMaster 1500.
It does not cover the Ram 2500 or 3500, Ram 1500 model years before 2019, or other makes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount styles vary by configuration: the shock may use a stem top with a loop bottom, or eyelets at both ends. Confirm the upper and lower mount styles for your truck before ordering.
Check the installed length against the 29.8-inch extended length, since that figure sets how much room the shock needs at full droop.
What’s included
One shock absorber, sold as an individual unit.
Not included: shock boots, which Pro Comp sells as an optional accessory.









