Overview
The Pro Comp ES9000 Series rear shock absorber, part number EXP929507, is a gas-charged twin tube shock for the 2018–2026 Jeep Wrangler JL.
The shock is designed for two-door Wrangler JL models and four-door Unlimited models in those years, and it is set up for a 2.5 inch lift. Its 10-stage velocity-sensitive valving aims for a smooth highway ride while also improving off-road handling. The 1 3/8 nylon-banded piston head and double-welded mounts are built for durability.
With a 29.83 inch extended length, a 17.32 inch collapsed length and 12.51 inches of travel, the shock’s measurements should be compared with your vehicle’s suspension before ordering a replacement.
Key features
- Gas-charged twin tube design
- 10-stage velocity-sensitive valving for ride comfort and off-road control
- 1 3/8 nylon-banded full-displacement piston head
- Double-welded shock mounts for strength
- Loop upper and lower mounts
- Non-adjustable, with no remote reservoir
- White shock finish
- Set up for a 2.5 inch lift
Ride and articulation
A rear shock controls how the axle and leaf or coil springs settle after a bump, and it also limits how far the axle can rebound. On a vehicle that articulates over rough ground, the shock’s travel and mount angles matter as much as its damping. Lift changes the geometry, so the shock’s length and mounting points should suit the suspension height.
Routine care is simple: keep the shock body clean, look for leaks, and make sure the mount bushings are not split. Because a shock works against the spring, a worn one lets the axle hop and can reduce tire contact on uneven ground. Replace shocks in matched pairs when possible.
- Look for fluid leaks along the shock body
- Check mount bushings for splits or looseness
- Keep the rubber dust boots free of grit
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP929507 |
| Shock series | ES9000 Series |
| Position | Rear |
| Shock type | Twin tube, gas charged |
| Extended length | 29.83 inches |
| Collapsed length | 17.32 inches |
| Travel length | 12.51 inches |
| Upper mount | Loop |
| Lower mount | Loop |
| Piston | 1 3/8 nylon-banded, full displacement |
| Lift application | 2.5 inch lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Quantity | 1 |
Vehicle fitment
It fits 2018–2026 Wrangler JL two-door models and four-door Unlimited models. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is set up for a 2.5 inch lift, so confirm your suspension’s lift height matches before installing it.
What’s included
One ES9000 Series rear shock absorber, part EXP929507.
Not included: a shock boot, which the specifications mark as not included.








