Overview
The Pro Comp 924508B is a PRO-X twin tube shock absorber for the 2000–2005 Ford Excursion and for the 2000–2005 F-250 and F-350 Super Duty. It has a 24.8-inch extended length, a 14.8-inch collapsed length and a 10.01-inch travel length.
The PRO-X is a general-purpose twin tube design for trucks and SUVs that spend most of their time on pavement, with occasional off-road driving. Pro Comp uses 10-stage velocity sensitive valving so the shock can handle different road conditions, and a 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft provide the working parts.
Both mounts are loop eyes, and the body is 2.0 inches in diameter with a black powder-coated finish. The gas charge is nitrogen stabilized, and the optional shock boot is not part of the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Heavy-duty load and clearance
Heavy-duty trucks and large SUVs spend much of their life carrying trailers, bed loads and passengers, which makes the rear shocks work harder than light-duty counterparts. A shock with a long stroke can still bottom out if the spring is worn or the load is above what the suspension was built for. Trailer towing is a common cause of premature wear on rear shocks.
Watch for oil on the shock body, a rough or bouncy ride after dips, and wheel hop when accelerating from a stop. Inspect the loop eyes and their bushings whenever a shock is off the vehicle, and replace worn bushings with the new shock to avoid play. Replacing the front and rear shocks together helps keep the chassis balanced under load.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924508B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 24.8 in |
| Collapsed length | 14.8 in |
| Travel length | 10.01 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2000–2005 Ford Excursion in the Eddie Bauer, Limited, XLS and XLT trims, and the 2000–2005 F-250 and F-350 Super Duty in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Excursion and Super Duty model years from 2006 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These are heavy-duty trucks and SUVs, so check the loop eyes against the existing hardware and make sure the 24.8-inch extended length fits the suspension height. Check clearance at full compression as well.
What’s included
Loop eyes at both ends make up this twin tube shock. The optional boot is listed separately.
Not included: the optional boot.









