Select your vehicle
-13%

Pro Comp Pro Runner Monotube Shock ABSorber

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp PRO-M monotube front shock, part EXPPR2098, sold individually
  • Designed for 2 to 2.5 inches of lift
  • Extended 23.2 in, collapsed 14.9 in
  • Fits the 1999 to 2004 Ford F-250 and F-350 Super Duty

Description

Overview

The Pro Comp Suspension EXPPR2098 is a PRO-M front monotube shock for trucks with 2 to 2.5 inches of lift. It fits the 1999 to 2004 Ford F-250 and F-350 Super Duty, and it is sold individually.

The shock is nitrogen gas charged with a monotube body and a floating piston that separates oil from gas. Its extra oil capacity helps the shock run cooler during off-road use.

Key features

  • Front monotube shock for 2 to 2.5 inches of lift
  • Extended length 23.2 inches, collapsed length 14.9 inches
  • Nitrogen gas charged with floating piston
  • Multi-stage disc pack valving, vehicle specific
  • 14 mm chrome hardened shaft
  • Polyurethane shock boot included

Front shock load and length

On a Super Duty, the front shocks control the movement of a heavy axle and help keep the truck steady when it carries a load or pulls a trailer. Because the front end takes the brunt of rough terrain, a shock with a monotube body and a floating piston can keep damping more consistent as the oil heats up. Those characteristics matter most on trucks that spend time on dirt roads or rocky trails.

When choosing a front shock for a lifted truck, check that the steering stops, brake hoses and sway bar links have room to move at full travel. Front shocks are usually replaced in pairs so both sides damp the same way. Worn bushings, leaking fluid, or a front end that wanders on the highway suggest it is time to inspect or replace the shock and its mounts.

Specifications

Brand Pro Comp Suspension
Part number EXPPR2098
Shock series PRO-M
Position Front
Extended length 23.2 in
Collapsed length 14.9 in
Upper and lower mount Loop
Lift 2 to 2.5 in
Shaft 14 mm chrome hardened
Finish Silver powder coat

Vehicle fitment

It fits the 1999 to 2004 Ford F-250 Super Duty and F-350 Super Duty, in trims including XL, XLT, Lariat and King Ranch.

Check fit for 2005 and later Super Duty trucks against your exact year, model and trim before buying.

Installation notes

Front shocks on a Super Duty carry the weight of the front axle, so the installed length should be compared with the original unit before the truck is lowered. The 23.2 inch extended and 14.9 inch collapsed lengths are the figures to match. Check the upper and lower loop mounts against the factory hardware, and make sure the polyurethane boot clears the body and the axle at full compression.

The 2 inch body is a fixed size, so confirm the front spring and frame clearance before the shock is fitted. Check that the upper and lower loop mounts sit flat in the factory brackets, and confirm the shaft moves freely without rubbing the boot at full travel.

Make sure the front shock sits square between its mounts before the truck is lowered, since a skewed unit wears the bushings quickly.

What’s included

One PRO-M front monotube shock with polyurethane boot under part number EXPPR2098.

Fitment

VehicleYearsTrims
Ford F-250 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT
Ford F-350 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the EXPPR2098 fit a 2002 Ford F-250 Super Duty?

Yes. It fits the 1999 to 2004 F-250 Super Duty, which includes 2002 models in XL, XLT, Lariat, King Ranch and Harley-Davidson Edition trims. Confirm your trim before ordering.

Is the EXPPR2098 for a front or rear position?

It is a front shock, designed for 2 to 2.5 inches of lift. Check the position against the shock being replaced before ordering, and confirm the lift height on your truck first.

Does it fit a 2005 Super Duty?

Check fit carefully. The shock is designed for the 1999 to 2004 Super Duty trucks, and 2005 and later models sit outside that range, so confirm your year before ordering.

Should front shocks be replaced in pairs?

Yes, in most cases. Replacing both front shocks together keeps damping even on each side and avoids a pull or uneven ride. Check the bushings and mounts at the same time so the new unit seats properly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon