Overview
The Pro Comp 929504B is a PRO-X twin tube shock absorber with a 29.8-inch extended length, a 17.3-inch collapsed length and a 12.45-inch travel length. It fits the 2004–2014 Ford F-150 in many trims, the 2007–2014 Jeep Wrangler JK in several 2-door and Unlimited trims, and the 2004–2006 Wrangler LJ and TJ.
The PRO-X is a general-purpose twin tube design for vehicles that see mostly paved roads, with occasional off-road use. Pro Comp uses 10-stage velocity sensitive valving so the damping works across varied road conditions, and a 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft form the core of the shock.
Both mounts are loop eyes, and the body is 2.0 inches in diameter with a black powder-coated finish. The shock is nitrogen stabilized, and the boot is an optional extra that is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Lift height and clearance
A longer shock extends the suspension’s range, so it has to reach through the full droop and compression of the truck without bottoming out or pulling on the lines. On a Wrangler, shock length interacts with the lift, control arm angles and bump stop height, so measure the installed setup before buying. Check that the loop eyes clear the frame and axle housing at full droop before driving.
Long-travel shocks can change how the suspension behaves near the top of its range, which is why many owners also review bump stops and sway bar links after a lift. Inspect the bushings and mount hardware at both ends after the first few trail runs. Look for oil film on the body, noise over small bumps and uneven wear, since these signs point to a shock that has lost damping.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929504B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 29.8 in |
| Collapsed length | 17.3 in |
| Travel length | 12.45 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2004–2014 Ford F-150 in trims including the FX2, FX4, King Ranch, Lariat, Platinum, STX and XLT, the 2007–2014 Jeep Wrangler JK in the 2-door and Unlimited 4-door Rubicon, Sahara, Sport, X and anniversary trims, the 2004–2006 Wrangler LJ Unlimited models, and the 2004–2006 Wrangler TJ.
Ford models from 2015 onward and Wrangler JL models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 29.8-inch extended length and 17.3-inch collapsed length are long for a Wrangler, so check them against the installed lift before fitting. Verify loop-eye clearance at the axle and frame at full droop.
What’s included
Loop eyes at both ends on one twin tube shock. The optional boot is listed separately.
Not included: the optional boot.









