Select your vehicle
-13%

Pro Comp PRO-X Twin Tube Shock Absorber – 925543B

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • PRO-X twin tube shock, 25.8-inch extended length
  • Fits Chevrolet, Dodge, GMC, Nissan and Ram trucks
  • 10-stage velocity sensitive valving
  • Loop mounts top and bottom
  • Part number 925543B

Description

Overview

The Pro Comp 925543B is a PRO-X twin tube shock absorber with a 25.8-inch extended length and a 15.5-inch collapsed length, for lifted full-size trucks and SUVs from Chevrolet, Dodge, GMC, Nissan and Ram.

Pro Comp built the PRO-X as a general-purpose twin tube for lifted trucks, and it suits mostly paved roads with the occasional off-road trip. The shock is nitrogen stabilized and uses 10-stage velocity sensitive valving with a 5/8-inch chrome hardened shaft.

The Teflon rebound stop and 1-3/8-inch nylon banded piston give a comfortable highway ride and control under demanding driving. The 10.19-inch travel length sits between the extended and compressed lengths shown above.

Key features

  • 25.8-inch extended length and 15.5-inch collapsed length
  • 10-stage velocity sensitive valving
  • Nitrogen stabilized, gas charged
  • Loop mounts at the top and bottom
  • 5/8-inch chrome hardened shaft with a 1-3/8-inch nylon banded piston
  • Black powder coat finish

Trucks, towing and shock life

Full-size trucks and SUVs carry heavy loads and towing demands that test shocks harder than most passenger cars. Lifted trucks also work their shocks through longer strokes, so the damping, mounts and bushings all see more motion. Towing with a camper or trailer tends to shorten shock life when the truck runs a heavy load every week. Matching the shock’s lengths to the vehicle keeps the suspension within its intended range.

Replacing shocks in pairs on an axle gives balanced damping from side to side. Many owners replace shocks alongside worn ball joints, bushings and bump stops, because worn parts can make a new shock feel less controlled. Look for fluid on the body, a rear end that keeps bouncing after bumps, and uneven tire wear.

  • Check loop mounts for cracks and play
  • Inspect bushings when replacing shocks
  • Keep mount hardware clean and rust free

Specifications

Brand Pro Comp Suspension
Part number 925543B
Shock series PRO-X
Extended length 25.8 inches
Compressed length 15.5 inches
Travel length 10.19 inches
Body diameter 2.0 inches
Mounts Loop (eyelet), top and bottom
Piston 1-3/8-inch nylon banded
Shaft 5/8-inch chrome hardened
Valving 10-stage velocity sensitive
Finish Black powder coat
Location Universal

Vehicle fitment

It fits 2002–2006 Chevrolet Avalanche 1500, Silverado 1500, Suburban 1500 and Tahoe; 2002–2006 GMC Sierra 1500, Yukon and Yukon XL 1500; 1994–2006 Dodge Ram 1500 and Ram 2500; 2004–2006 Nissan Titan; and 2014–2021 Ram 2500.

Chevrolet and GMC models after 2006, and Ram 2500 trucks from 2007 to 2013, are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The shock’s 25.8-inch extended and 15.5-inch compressed lengths should be checked against your truck’s mount points before installing, and the loop mounts at each end need to match the hardware you have.

What’s included

One PRO-X twin tube shock per unit.

Not included: The optional shock boot, which is sold separately.

Fitment

VehicleYearsTrims
Chevrolet Avalanche 15002002–2006Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71
Chevrolet Silverado 15002002–2006Base, Hybrid, LS, LT, SS, WT, Z71
Chevrolet Suburban 15002002–2006Base, LS, LT, LTZ, Z71
Chevrolet Tahoe2002–2006Base, LS, LT, Z71
Dodge Ram 15001994–2006Base, LT, Laramie, SLT, SRT-10, SS/T 5.9L, ST, Sport, TRX4, WS
Dodge Ram 25001994–2006Base, Laramie, Power Wagon, SLT, ST, Sport, TRX4
GMC Sierra 15002002–2006Base, Denali, HT, Hybrid, SL, SLE, SLT, WT
GMC Yukon2002–2006Denali, SL, SLE, SLT
GMC Yukon XL 15002002–2006Denali, SL, SLE, SLT
Nissan Titan2004–2006LE, SE, XE
Ram 25002014–2021Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Pro Comp 925543B fit a 2005 Chevrolet Silverado 1500?

Yes. It fits the 2002–2006 Chevrolet Silverado 1500, which includes 2005. The Tahoe and Suburban, along with the GMC Sierra and Yukon in the same years, are covered too.

What lengths does the Pro Comp 925543B shock measure?

It measures 25.8 inches extended and 15.5 inches collapsed, with 10.19 inches of travel. The body is 2.0 inches in diameter, and both mounts are loops.

Does the Pro Comp 925543B come with a shock boot?

No. The optional shock boot is not included and is available separately. The shock is nitrogen stabilized and has a 5/8-inch chrome hardened shaft, with loop mounts at both ends.

Can I use this shock for towing?

Yes, when the shock fits your truck. Towing adds load to each shock, so inspect them more often and replace worn ones before the next long haul.

How do I keep loop mounts in good shape?

Inspect the loops for cracks, rust and bushing wear every time the tires are rotated. Clean the mount hardware and check that bolts are snug after the first few drives on a new shock.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon