Overview
The Pro Comp 917553B is a PRO-X front twin tube shock absorber for the 1994–2001 Dodge Ram 1500, 2500 and 3500 pickups. It has a 17.55-inch extended length, an 11.05-inch collapsed length and 6.50 inches of travel, and it is built for the front position.
The PRO-X is a general-purpose twin tube design intended for trucks that spend most of their time on pavement with occasional off-road use. Pro Comp uses 10-stage velocity sensitive valving to adjust damping across road conditions, along with a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft.
Its body is 2.0 inches across and finished in black powder coat, with a stem upper mount and a loop lower mount. It is nitrogen stabilized, and the optional shock boot is sold separately from the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Nitrogen stabilized
- Black powder-coated finish
Front shock upkeep
A front shock works alongside the front springs, the steering linkage and the bump stops. Its job is to control spring movement after bumps and during braking, which helps keep the front tires in contact with the road. Because the front axle carries steering loads, look for play in the upper mount and wear in the lower eye bushing at each inspection.
Pickups that tow or haul often wear front shocks faster than light-use trucks. Heat from long downhill stretches can also shorten a shock’s service life. When replacing, check the stem upper mount for play, the loop lower mount for cracks, and the bump stops for wear.
- Look for oil seepage on the shock body
- Check tire wear across the front axle
- Inspect steering linkage for loose joints
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 917553B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Position | Front |
| Extended length | 17.55 in |
| Collapsed length | 11.05 in |
| Travel length | 6.50 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1994–2001 Dodge Ram 1500 in several trims, including the Laramie, SLT, Sport and ST, along with the Ram 2500 and Ram 3500 Base models for the same years.
Ram models from 2002 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem upper mount and loop lower mount should be checked against the front bracket before installation. The 17.55-inch extended length is sized for a front suspension, so confirm the ride height before driving the truck.
What’s included
One front twin tube shock with a stem upper mount. The optional boot is sold on its own and is not part of this item.
Not included: the optional boot and any installation parts.









