Select your vehicle
-13%

Pro Comp PRO-M Monotube Rear Shock Absorber – PR2050

Pro Comp Suspension

$55.91In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 16, 2026 9:10 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2005-2023 Toyota Tacoma
  • Monotube PRO-M rear shock, nitrogen gas charged, vehicle-specific valving
  • Extended length 26.9 inches, collapsed length 16.8 inches
  • Polyurethane shock boot included, sold individually

Description

Overview

The Pro Comp PRO-M Monotube Rear Shock Absorber, part number PR2050, is a gas-charged rear shock for the 2005-2023 Toyota Tacoma. Pro Comp Suspension designs it for 4-inch and 6-inch lifted applications with vehicle-specific valving and sells it individually.

The PRO-M is an upgrade shock for off-road use. Pro Comp says its floating piston keeps oil and nitrogen separate, which it says prevents cavitation that robs performance, and that the multi-stage valving is tuned for each application.

The 2.0 shock body gives extra oil capacity for heat dissipation during off-road use, and the wiper seal is designed so the shock does not leak. The shock is meant to give consistent ride quality off-road and a smooth ride on pavement. It is built for either 4-inch or 6-inch lifts, so check which lift your truck runs before ordering. It is nitrogen gas charged, and the 14mm chrome hardened shaft is protected by the polyurethane boot included with each shock.

It is a step up in off-road performance, built for off-road use while still giving a smooth ride on the road.

Key features

  • Internal floating piston separates the oil from the nitrogen charge
  • Multi-stage disc pack valving, vehicle-specific
  • 2.0 shock body with more oil capacity
  • New wiper seal design
  • 14mm chrome hardened shaft
  • Silver powder coat finish and polyurethane shock boot

Tacoma rear shock choices

On a Tacoma the rear shock works with the leaf springs or the rear suspension hardware to control rebound and body movement. Choosing between a 4-inch and a 6-inch lift setup affects how the shock sits at full extension, so the lift should be measured before the shock is ordered.

Shocks on a truck used for hauling and trail work are exposed to more debris and load cycles. Clean the boot after trips and check the mounts for play. A rear shock with a consistent valve response helps the truck feel settled when the bed is loaded.

Bump stops and spring hardware often wear alongside shocks, so inspect them while the rear end is apart.

  • Measure lift height before ordering
  • Check boot condition after trail use
  • Inspect bump stops during service

Specifications

Brand Pro Comp Suspension
Part number PR2050
Shock series PRO-M
Shock type Monotube, nitrogen gas charged
Extended length 26.9 inches
Collapsed length 16.8 inches
Upper and lower mounts Loop (eyelet)
Shaft 14mm chrome hardened
Lift height Fits 4-inch and 6-inch lifts; confirm which applies to your truck
Finish Silver powder coat
Boot Polyurethane, included
Position Rear
Sold as Individually

Vehicle fitment

It is made for 2005 to 2023 Toyota Tacoma trucks across the Tacoma trim levels.

Confirm your vehicle’s year, model and trim before ordering, and check the lift height, since the shock is made for either 4 or 6 inches.

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2023Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the PR2050 fit a 2016 Toyota Tacoma?

Yes. It fits 2005 to 2023 Toyota Tacoma trucks, so a 2016 model year falls within that range. Confirm your trim and lift height before ordering.

Is the shock gas charged?

Yes. The PR2050 is nitrogen gas charged and uses a monotube design with an internal floating piston, which Pro Comp says prevents the cavitation that robs performance.

Does the shock include a boot?

Yes. A polyurethane shock boot is included with the PR2050, and the shock is sold individually, so each rear corner needs its own unit.

Should the bump stops be replaced with new shocks?

Bump stops are worn by the same loads that wear shocks, so inspect them when the shock is replaced. Cracked or flattened bump stops reduce control at the end of travel and can damage the new shock if the stops are missing.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon