Overview
The Pro Comp PRO-X Twin Tube Shock Absorber, part number EXP924750B (also written 924750B), is a rear twin tube shock for the 2003-2024 Toyota 4Runner and the 2007-2014 Toyota FJ Cruiser. It is designed for vehicles that see a lot of paved road use with the occasional off-road trip.
It is a gas-charged shock with a 24.7-inch extended length, a 14.5-inch collapsed length and 10.18 inches of travel. The body is 2.0 inches in diameter, the upper mount is a stem, and the finish is black powder coat. The gas charge is nitrogen stabilized.
The 10-stage velocity sensitive valving adapts to different road conditions while improving handling. A Teflon rebound stop supports a comfortable highway ride, and a 5/8-inch chrome hardened piston rod handles demanding driving. The shock is available in extended lengths for lifted trucks.
Key features
- 10-stage velocity sensitive valving
- 5/8-inch chrome hardened shaft
- 1-3/8-inch nylon banded piston
- Teflon rebound stop
- Nitrogen stabilized, gas charged
- Black powder coat finish
Rear shock service
The rear shocks on a 4Runner or FJ Cruiser carry much of the body’s weight over rough pavement and trail ruts, so they wear steadily with age and mileage. Worn rear shocks often show up as a floaty feel, rear end bounce after dips, or a rear that sags under cargo. Replacing them in pairs keeps the back of the vehicle level.
Trail use adds stress to the mounts and bushings. Check the upper stem and lower mount for cracked rubber or loose hardware after rough trips, and inspect the bump stops for damage. If a lift is installed, the rear shocks may need to be longer to match the new ride height, so measure before buying.
- Check rear bushings for cracking after trail use
- Look for oil on the shock body
- Torque mount hardware after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP924750B |
| Shock series | PRO-X |
| Position | Rear |
| Shock type | Twin tube |
| Extended length | 24.7 inches |
| Collapsed length | 14.5 inches |
| Travel length | 10.18 inches |
| Body diameter | 2.0 inches |
| Upper mount | Stem |
| Piston | 1-3/8-inch nylon banded |
| Shaft | 5/8-inch chrome hardened |
| Finish | Black powder coat |
| Charge | Nitrogen stabilized, gas charged |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2003-2024 Toyota 4Runner and the 2007-2014 Toyota FJ Cruiser. Other Toyota trucks and SUVs are not covered. The rear position and the 24.7-inch extended length are the two measurements to match first.
The 4Runner years cover a long run of model years, so measure your current shock’s extended and collapsed lengths against the specifications before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, sold individually.
Not included: The optional shock boot, which is sold separately.









